Vszerda Mini SAS SFF-8087 36-pin male to 4 SATA 7-pin female 0.5 m sata cable
Connects a Mini SAS SFF-8087 36-pin controller to four SATA drives with a 0.5 m cable rated for 10.0 Gbps
Cable Length 0.5m
- 0.5m$15.99
- 1m$15.99
- Connect up to four SATA drives with one Mini SAS SFF-8087 36-pin controller port
- 5 m length fits tight server chassis and short backplane runs
- 0 Gbps data rate supports high-throughput storage arrays
- PVC jacket with copper conductors protects signal integrity over the full run
- Red and black colour coding simplifies cable tracing in dense enclosures
Mini SAS SFF-8087 to 4 SATA Cable
This 0.5 metre cable connects a Mini SAS SFF-8087 36-pin male controller port to four SATA 7-pin female drive connectors. It links a host or RAID controller to a backplane or individual drives inside a server or workstation. Data transfer rates reach up to 10.0 Gbps. The assembly uses PVC and copper construction with red and black colour coding.
Suits controllers with SFF-8087 ports
Builders wiring a single controller to four SATA drives or a four-bay backplane will find the pin-out and length convenient. The fixed 0.5 metre reach is designed for internal chassis routing. Buyers who need more drive connections, a longer run, or a different controller interface should look at other cable configurations.
36-pin SFF-8087 male connector
The single 36-pin Mini SAS plug determines compatibility; it must match the controller or HBA port exactly. Four SATA 7-pin female ends accept standard drive cables or backplane headers. Verify the controller port type before purchase.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda 0.5 m Mini SAS 36-pin SFF-8087 to 90° 4× SATA 7-pin Breakout Cable with Net Jacket
Questions about this item
What controller connector does the cable plug into?
The cable has a Mini SAS SFF-8087 36 pin male connector for the controller side.
How do I connect the four drives to the breakout end?
Each of the four SATA 7 pin female connectors attaches directly to a drive or backplane port.
When should I replace this cable?
Replace it if the PVC jacket shows cracking, the copper conductors are exposed, or the connectors no longer seat firmly.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables










