Vszerda 4-pack SATA cable double 90° 0.5 m
Four right-angled SATA data cables, 0.5 m each, support 6 Gbps transfers and fit tight server builds
Cable Length 0.5m
- 0.5m$14.99
- 1m$15.99
- Four cables in one pack simplify multi-drive builds
- Double 90° connectors fit tight server chassis
- 6 Gbps SATA speed supports fast SSD and HDD transfers
- Half-sleeved braid keeps four runs tidy and labelled
- Works with 2.5" SSDs, 3.5" HDDs and optical drives
Vszerda 4-pack SATA double 90° cables
This set contains four SATA data cables, each 0.5 m long with double 90-degree connectors. They are designed for system builders and server administrators who need to route data links in confined chassis or dense drive bays. The cables carry only data; power must be supplied separately to each drive.
Right-angle routing for tight builds
Each cable uses a 7-pin SATA female connector at both ends, bent at 90 degrees to sit flat against drive ports and motherboard headers. The half-sleeved, nylon-braided bundle keeps the four runs together, reducing clutter and improving airflow. P1-to-P4 labels simplify identification when wiring multiple drives or RAID arrays.
6 Gbps SATA III performance
The cables support up to 6 Gbps transfer rates and remain backward compatible with SATA I and SATA II devices. They connect 2.5" SSDs, 3.5" HDDs, optical drives and compatible RAID controllers without adding latency. Buyers who need longer runs, straight connectors or combined power-and-data cables will need a different solution.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda 0.5 m Mini SAS 36-pin SFF-8087 to 90° 4× SATA 7-pin Breakout Cable with Net Jacket
Vszerda Mini SAS SFF-8087 36-pin male to 4 SATA 7-pin female 0.5 m sata cable
Questions about this item
Will the 0.5 m length reach drives in a full-size server chassis?
At 0.5 m each cable spans roughly half a metre from controller to drive bay, so measure your chassis depth before ordering.
Do the nylon-braided, double 90° connectors run hot or draw extra power under constant 6 Gbps traffic?
The cables carry data only and add no measurable heat or power draw; the braid simply protects signal integrity in tight airflow paths.
My drives only have SATA power connectors — what else do I need to make these cables work?
You must supply separate SATA power from your PSU; these four data cables provide no power lines.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III










