Vszerda SAS 4 SATA Host to 4 SATA 7pin Target 6Gbps Cable 50cm
Connects four SATA drives to a 4-port SATA host controller at 6 Gbps using a 50 cm SAS breakout cable
Cable Length 50 cm
- 50 cm$15.99
- 100 cm$17.99
- Connect four SATA drives to a single controller
- 6 Gbps SAS specification supports high-speed data transfer
- 50 cm length suits compact server builds
- Straight 7-pin SATA connectors on both ends
- Designed for RAID and multi-drive configurations
Connection layout
This cable connects four SATA drives to a four-port SATA host controller. It uses a SAS 4 SATA host connector that splits into four individual SATA 7-pin target connectors. The 50cm length suits typical server and workstation chassis. Builders needing more than four drives or a different host interface must choose another cable.
Signal integrity
The assembly meets the 6Gbps SAS specification for reliable data transfer. Passive construction means no extra power draw or active components that could generate heat or noise. Cable routing and airflow depend entirely on the enclosure design. Users requiring active signal boosting for longer runs will not find it here.
Ready to install
No software, drivers or mounting hardware are included in the package. The cable is plug-and-play with any compliant SATA or SAS controller. RAID configuration and drive management are handled by the host system. Customers expecting bundled brackets, screws or configuration utilities should look elsewhere.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda SAS Internal 4 SATA Host to 4 SATA 7pin Target 6Gbps Cable 100 cm
Vszerda SFF-8087 to 4x SFF-8482 SAS cable with 15-pin SATA power 100 cm
Questions about this item
How do I connect the four SATA 7-pin host connectors to my controller and avoid plugging them into the wrong ports?
Align each host connector with the matching SATA 7-pin port on the controller; the keyed L-shape prevents upside-down insertion.
Will the 50 cm cable length require any periodic inspection or replacement under normal server use?
The cable is passive copper with no moving parts; replacement is only needed if a connector is damaged or the cable is kinked.
What speed ceiling will I hit first when all four drives run sustained transfers on this 6 Gbps SAS-rated assembly?
Each lane tops out at 6 Gbps, so aggregate throughput is limited by the controller and drive capabilities, not the cable itself.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables










