Vszerda Mini 4 SAS 36-Pin SFF-8087 to 4 SAS 29-Pin SFF-8482 with 15-Pin SATA Power 50cm
Connects a 36-pin SFF-8087 controller to four 29-pin SFF-8482 SAS drives with integrated 15-pin SATA power over 50cm
Cable Length 50 cm
- 50 cm$14.99
- 100 cm$17.99
- Connect four SAS drives using a single 36-pin SFF-8087 port
- Power all four drives directly from a 15-pin SATA power connector
- 50 cm cable length keeps internal routing tidy
- Each drive connects via standard 29-pin SFF-8482 interface
36-Pin SFF-8087 breakout cable
This 50cm cable adapts a single 36-pin SFF-8087 Mini SAS port into four 29-pin SFF-8482 SAS connectors. It targets builders connecting multiple SAS drives to a controller or backplane that only offers the dense 36-pin interface. The integrated 15-pin SATA power connector supplies drive power directly from the same assembly. It suits storage servers and workstations using SAS hard drives with SFF-8482 ports.
Bundled power connector simplifies cabling
The 15-pin SATA power plug means each drive receives both data and power from one cable run, reducing the need for separate power leads from the PSU. This helps keep internal routing tidy in dense drive bays or external enclosures. The cable does not convert SAS signalling to SATA protocol, so SATA-only drives cannot be used on the SFF-8482 ends. Builders needing SATA drive support or longer reach must source a different assembly.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $14.99
- Pricier than about 55% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda SAS Internal 4 SATA Host to 4 SATA 7pin Target 6Gbps Cable 100 cm
Vszerda SFF-8087 to 4x SFF-8482 SAS cable with 15-pin SATA power 100 cm
Questions about this item
Will the 15-pin SATA power connector on this cable need replacement over time?
The 15-pin SATA power connector is a standard interface rated for repeated mating cycles; under normal use it does not require scheduled replacement.
What is the first limit reached when this 50cm cable runs four drives at full SAS speed continuously?
Signal integrity over the 50cm length and the 36-pin SFF-8087 to 29-pin SFF-8482 breakout typically becomes the limiting factor before the cable itself degrades.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SATAPOWADPL 6 in 4 pin Molex to left angle SATA power adapter cable
- 6 in (15.2 cm)
- Cable Connectors
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
BENFEI 000306black-6p SATA cable 6 pack 18 inch 90 degree locking latch black
- Male-to-Male
- SATA III










