STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Four 1 metre SATA III cables with straight-to-90-degree connectors support 6 Gbps transfers and include locking latches for secure data links
This pack contains four SATA data cables, each 3.3 feet long. Every cable has a straight connector on one end and a 90-degree right-angle connector on the other. The nylon-braided sleeve bundles the four leads together for tidier routing inside a case. No power conductors are included; drives must be powered separately.
Each cable supports the SATA III standard with a maximum data rate of 6 Gbps. The 30 AWG conductors are rated for 12 Gbps SAS signalling, so the link runs at the speed of the attached drive and controller. Backward compatibility with SATA I and SATA II devices is maintained. A locking latch on each connector secures the connection against vibration.
Builders adding multiple 2.5 or 3.5 drives to a motherboard or RAID controller will appreciate the labelled P1–P4 ends and the mixed straight-to-right-angle geometry for tight spaces. The set is not for anyone needing a single cable, a different length, or a straight-to-straight or right-angle-to-right-angle orientation. It also cannot supply drive power.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ADCAUDX |
| Model name | SATA-011 |
| Product type | SATA Cables |
| Product color | Black/Blue |
| Performance | |
| Rated speed | 6 GB/s |
| Size & build | |
| Conductor type | Nylon |
The 6 Gbps rating is the maximum interface speed; actual throughput depends on the drive and controller you connect, and the cable is backward compatible with SATA I and II devices.
It meets the SATA III specification, supporting up to 6 Gbps data rates while remaining compatible with older SATA I and II drives.
The right-angle plug is designed for tight spaces such as server chassis or stacked drives; each cable is 3.3 ft long and uses a thin 30 AWG nylon-braided jacket for easier routing.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?