Vszerda SFF-8643 to 4 SATA cable 100cm
Connects a 12 Gbps SFF-8643 RAID controller to four SATA drives with 100 cm length and secure latching connectors
Cable Length 3.3 Feet
- 1.64 Feet$10.99
- 3.3 Feet$15.99
- Connects 12 Gbps RAID controller to four SATA drives
- 36-pin SFF-8643 host connector with secure latch lock
- Four SATA 7-pin target connectors with stainless steel latches
- 100 cm slim ribbon cable with acetate cloth tape strain relief
- Woven mesh sheath on half length for easier routing
Host-to-drive connectivity
This Vszerda cable links a RAID controller with an SFF-8643 port to four SATA hard drives or solid-state drives. The 100 cm ribbon assembly carries 6 Gbps per lane and is built for internal chassis routing. Stainless-steel latches on every connector keep each link secure under vibration.
Suits builders adding SATA arrays to a Mini SAS
Installers who need to break out a single 36-pin SFF-8643 host port into four 7-pin SATA targets will find the pin-out and length convenient. The woven mesh sheath on the first half of the run eases dressing behind backplanes. Systems that require native 12 Gbps SAS device links or a different breakout count should look elsewhere.
6 Gbps per SATA lane
Each of the four SATA connectors delivers up to 6 Gbps, matching the SATA III specification. The hybrid HD Mini SAS design also maintains compatibility with 3 Gbps and 6 Gbps hosts while the infrastructure moves toward 12 Gbps..verify this rate against your controller and drive specifications before purchase.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $15.99
- Pricier than about 60% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda SFF-8087 to 4x SFF-8482 SAS cable with SATA 15-pin power 0.5 m
Questions about this item
What is the maximum data rate per SATA lane on this SFF-8643 to 4 SATA cable?
Each of the four SATA lanes supports up to 6 Gbps, while the SFF-8643 host side is rated for 12 Gbps aggregate bandwidth.
Does the woven mesh sheath and acetate cloth tape help with airflow and heat dissipation in a fully populated chassis?
The woven mesh covers half the cable for easier routing and the acetate cloth tape provides strain relief; neither is specified as a thermal management feature.
Which RAID controllers are confirmed compatible with this SFF-8643 to 4 SATA forward cable?
The cable is listed as compatible with Adaptec RAID 71605 and 7895 storage controllers.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SLSATAADAP6 6-Inch Slimline SATA to SATA Adapter
- 6 in (15.2 cm)
- Others
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Longdex SATA22PEC-50CM-4 SATA 22-pin female to 7+15-pin male combo extension cable 50cm 4-pack
- Sata, Sata
- SATA
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
ADCAUDX SATA-005 6pcs SATA III 1m 6Gbps Braided Cable Set
- 6 GB/s
- SATA Cables










