Vszerda SFF-8643 to 4x SATA 90-degree cable 3.3ft
Connects a Mini SAS SFF-8643 host port to four SATA drives using 90-degree connectors for tight spaces over 3.3ft
Cable Length 3.3 Feet
- 1.64 Feet$10.99
- 3.3 Feet$18.99
- Connect up to four drives from one SFF-8643 port
- 90-degree SATA ends ease routing in tight chassis
- 3 ft length reaches drives across full-tower cases
- SFF-8643 host connector links to motherboard or RAID controller
- 12 Gb/s SAS interface supports high-throughput storage workloads
SFF-8643 to 4x SATA cable for RAID controllers
This Vszerda cable connects a Mini SAS SFF-8643 host port on a motherboard or RAID controller to four SATA hard drives. The 3.3ft length suits typical chassis routing. It is built for internal storage arrays that use SAS controllers with SATA target devices. Buyers who need to connect a backplane with SFF-8643 ports should choose a different cable.
12 Gb/s SAS interface and 90-degree connector limits
The SFF-8643 interface supports Serial Attached SCSI at up to 12 Gb/s, allowing a transition from 6 Gb/s links. The 90-degree SATA ends improve routing in tight spaces but require enough clearance for the angled plug. The cable only works when the SFF-8643 side is a host port; it will not function if that port is on a backplane.
Straightforward install with one common mistake
Installation is a simple push-fit of the SFF-8643 connector into the controller and the four SATA plugs into the drives. The most frequent error is using the cable with a backplane SFF-8643 port instead of a host port, which prevents the link from coming up. Verify the port role before fitting the cable.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda SFF-8087 to 4x SFF-8482 SAS cable with SATA 15-pin power 0.5 m
Questions about this item
Which SFF-8643 host connector variant matches my controller?
This cable uses an SFF-8643 host plug for motherboards or RAID controllers with Mini SAS ports; it will not work if the SFF-8643 port is on a backplane.
What does the 12 Gb SAS rating deliver when the cable is installed?
The 12 Gb SAS interface supports high-throughput data access, and hybrid cable designs allow a smooth transition from 6 Gb to 12 Gb speeds in practice.
How does the 90-degree SATA end affect the SATA connection?
The 90-degree SATA connectors improve cable routing in tight spaces while maintaining standard SATA links to each hard drive.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SATAPOWADAPR 6 in 4 Pin Molex to Right Angle SATA Power Cable Adapter
- 6 in (15.2 cm)
- no type specified
Nippon Labs SATA-0.5RR 0.5m SATA cable right-angle pair
- 1.64 ft (0.5m)
- SATA II
BUCIER SATA-III 1m 4-pack Blue/Black nylon braided 6Gbps data cable
- 6 Gbit/s
- SATA Cables
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
BUCIER 22 Pin SATA Male-to-Female Data Power Cable 30cm
- Male-to-Female
- SATA










