Vszerda SFF-8654 4i to SFF-8639 U.2 Cable 50cm
Connects a U.2 SFF-8639 device to a SlimSAS SFF-8654 4i controller at 24Gbps over 50cm
Cable Length 50 cm
- 50 cm$20.99
- 100 cm$17.99
- 24 Gb/s SAS throughput for high-speed storage links
- PCIe 4.0 8 GT/s per channel supports modern controllers
- SlimSAS SFF-8654 4i to U.2 SFF-8639 connects drives directly
- 50 cm length fits compact chassis routing
- Shielded construction maintains signal integrity over full reach
Connection Overview
The Vszerda SFF-8654 4i to SFF-8639 U.2 Cable is a new 50cm interconnect built for PCIe 4.0 and SAS environments. It links a controller or backplane with a SlimSAS 4i port to a drive or enclosure using the SFF-8639 U.2 interface. The assembly supports 24Gb/s SAS and 8GT/s PCIe per channel.
Fit and Limits
This cable suits builders wiring U.2 devices to SlimSAS 4i connectors inside servers or workstations. It does not serve installations that require a different length, an alternative connector such as MCIO, or a direct SATA signal path without a compatible controller.
Deciding Spec
The 24Gb/s SAS and PCIe 4.0 rating per channel is the single figure that determines whether this cable matches the bandwidth needs of the attached storage device and host controller.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $20.99
- Pricier than about 75% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda SFF-8087 to 4x SFF-8482 SAS cable with 15-pin SATA power 100 cm
Vszerda Internal SAS 4 SATA Host to 4 SATA 7pin Target 6Gbps Cable 50cm
Questions about this item
How do I connect the SFF-8654 4i end to my controller and what is the common mistake?
Align the keyed SFF-8654 4i plug with the controller port and push straight in until it clicks; the frequent error is forcing it upside-down, which bends the delicate pins inside the SlimSAS connector.
What upkeep does the 50cm cable need over time?
No scheduled maintenance is required; simply inspect the SFF-8639 and SFF-8654 4i ends for dust or bent contacts whenever you reseat drives, and replace the cable if the latch tabs snap or the sheath shows kinks.
At what point does the 24Gbps SAS link hit its ceiling during heavy I/O?
The four-lane 24Gbps SAS interface saturates first; once aggregate throughput reaches that 24Gbps limit, latency climbs and queues build regardless of the 8GT/s PCIe 4.0 per-channel capability.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
Benfei 000221black USB 3.0 to SATA adapter .5 m with 12 V 2 A power supply
- Male
- USB
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II










