Vszerda SFF-8654 4i to SFF-8639 U.2 Cable 100cm
Connects a U.2 SFF-8639 device to a SlimSAS SFF-8654 4i controller at 24 Gbps over 100 cm
Cable Length 100 cm
- 50 cm$14.99
- 100 cm$22.99
- 24 Gb/s SAS bandwidth enables ultra-fast storage throughput
- PCIe 4.0 support at 8 GT/s per channel for modern controllers
- SlimSAS SFF-8654 4i to U.2 SFF-8639 connects drives to controllers
- 100 cm length suits full-tower and rackmount chassis layouts
- New condition ensures reliable signal integrity out of the box
SFF-8654 4i to U.2 connectivity
This cable links a controller with a SlimSAS SFF-8654 4i port to a U.2 device using an SFF-8639 connector. It is built for internal connections inside servers or workstations that use SAS or PCIe 4.0 signalling. The 100 cm length gives extra reach compared to shorter assemblies.
24 Gbps SAS and 8 GT/s PCIe per lane
The assembly supports 24 Gbps SAS and 8 GT/s PCIe 4.0 per channel, providing headroom for high-throughput storage. Bandwidth runs out when the attached controller or drive tops out below those rates or when the link negotiates a slower generation.
Straight mechanical adaptation only
No active electronics, firmware or software are included in the bundle. The cable simply adapts the physical interface so the host and device can negotiate their highest common speed.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Vszerda Internal SAS 4 SATA Host to 4 SATA 7pin Target 6Gbps Cable 50cm
Questions about this item
Does the SFF-8654 4i connector on this cable work with my existing SAS controller that only supports lower speeds?
The cable carries 24 Gb/s per channel for SAS, so it will operate at the speed your controller negotiates.
How can I confirm the link is running at the rated 24 Gb/s after installation?
Check the controller BIOS or operating-system storage utility; they report the negotiated link speed per lane.
The box lists a 50 cm cable but the title says 100 cm — which length will I actually receive?
The supplier highlights specify a regular size of 50 cm for this SFF-8654 4i to SFF-8639 U.2 cable.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
BUCIER 5Pack SATA III Cable 8 inch Short Thin 0.2M Straight Flexible 6Gb Data Locking Latch
- Sata 7pin
- SATA Cables
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
BUCIER Mini SAS 36 SFF-8087 to 4 SFF-8482 SATA Power 1m
- 6 Gbit/s
- Sff-8087 to Sff-848…










