STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects a SlimSAS 8i SFF-8654 port to eight latching SATA drives using a 50 cm, 28 AWG PVC cable
This 50 cm cable connects a single SlimSAS 8i SFF-8654 port to eight latching SATA connectors. It is built for servers and storage systems that need to break out one high-density link into multiple drive connections. The low-profile plug saves space in dense chassis while the latch secures the link against vibration. It suits administrators adding internal drive bays to a backplane or HBA.
The male-to-male design links a controller or backplane directly to SATA hard drives or SSDs. It is not for users who need an eSATA bracket for external enclosures or who require a straight-through SATA-to-SATA lead. The 1.6 foot length only reaches devices inside the same chassis, so rack-to-rack runs need a different cable.
The cable uses 28 AWG copper wires wrapped in a polyvinyl chloride sheath for flexibility and durability. This construction supports the stated 1 Gbps data rate per lane with minimal signal loss across the 50 cm run. The eight separate SATA ends each carry a standard 7-pin signal connection to the attached drives.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Micro SATA Cables |
| Performance | |
| Rated speed | 1 Gbit/s |
| Ports & slots | |
| Connector gender | Male-to-Male |
| Size & build | |
| Overall length | 1.6 ft (0.49 m) |
| Conductor type | PVC |
Align the straight SlimSAS 8i connector with the port, press evenly until the latch clicks, then pull gently to confirm it is seated; forcing the latch sideways can bend the internal pins.
The PVC jacket resists abrasion and the 28AWG copper conductors are rated for continuous operation; replacement is only needed if the cable is kinked, cut or the latch mechanism breaks.
Each of the eight SATA lanes is capped at 1 Gbps, so aggregate throughput saturates when combined drive traffic exceeds that per-lane ceiling, showing up as queue depth growth on the host controller.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?