We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

WRIARICH

WRIARICH PCI-E to Storage Adapter 4 Ports SATA 3.0 6Gbps Low Profile Bracket

SKU CH-0RH6-WN2BH

Adds four SATA 3.0 ports at 6Gbps through a PCI Express slot with a low-profile bracket included

  • First connector30
  • Connector typeStandard
  • Units per package1
  • Product typeBlack
  • Product colorBlack
  • DetailsPci, 2.4 L x 13.2 W x 15.5 H centimeters, 0.1 kg, 12 months,
  • Add four SATA 3.0 6Gbps ports via PCIe slot
  • Alloy heatsink keeps ports at room temperature for stable operation
  • Supports AHCI and NCQ boosting drive performance 5 to 20 percent
  • Gold-plated 15U conductors improve signal integrity and durability
  • Low-profile bracket fits 2U and 4U chassis with replaceable bezel

PCIe SATA expansion card with four ports

This PCIe SATA expansion card adds four SATA 3.0 ports running at 6Gbps, letting you connect additional hard drives or SSDs. It fits PCI Express x1, x4, x8 or x16 slots and works with Windows 7, 8, 10, 11, Linux and macOS. The low-profile bracket is included for compact chassis.

Alloy heatsink and gold-plated connectors

A built-in alloy heatsink covers the controller to keep the two SATA ports at room temperature during sustained transfers. The 15U gold-plated conductors improve conductivity and resist wear, while the thick PCB withstands temperature cycles without deforming. A replaceable bezel lets the card mount in 4U or 2U racks.

MBR boot only with UEFI limitations

The card supports MBR boot mode only; Windows 11 under UEFI will most likely not recognise it, so confirm your motherboard boot mode before purchase. Driver-free operation applies to MBR on Windows 10 and 11, while UEFI requires manual configuration. Windows XP and Server 2003 are not supported.

How it compares

Measured against everything we stock in Interface & Card Adapters, at today’s prices. Recalculated every night.

Price $23.99
Pricier than about 57% of the 354 comparable items (median $21.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDell
Product lineELUTENG-...
Product typeBlack
Product colorBlack
Ports & slots
First connector30
Connector typeStandard
In the box
Units per package1
In the box1, false

Questions about this item

What SATA standard does the 4-port card use and what is its maximum transfer rate?

The card provides four SATA 3.0 ports each running at up to 6 Gbps.

What are the card dimensions and which bracket is included for small chassis?

The board measures 2.4 x 13.2 x 15.5 cm and ships with a low-profile bracket for 4U or 2U cases.

How is the adapter installed and what BIOS setting must be checked first?

Insert the card into any PCIe x1 x4 x8 or x16 slot, attach the low-profile bracket if needed, then verify the motherboard is set to MBR boot because UEFI mode will not recognise the drives.

More in Interface & Card Adapters

Similar items