Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects Corsair Type 3 and Type 4 modular PSUs to three Molex devices using 18AWG wire with an angled 6‑pin plug
This new YEPLOOK cable connects a Corsair Type 4 modular power supply to up to three Molex devices. It fits RM550x, RM650x, RM750x, RM850x and RM1000x units. The 6-pin male end plugs into the PSU while three 4-pin female connectors power fans, older drives or peripherals. Black 18AWG UL1007 tinned copper wire resists heat and stays flexible for tidy routing.
Use this cable when your Corsair Type 4 PSU lacks enough native Molex connectors for legacy hardware. The angled 6-pin plug eases insertion in tight bays and the 50, 15 and 15 centimetre segments let you reach multiple devices without daisy-chaining adapters. It is not compatible with Corsair Type 1 or Type 2 power supplies or any non-Corsair brand.
Verify that your power supply is a Corsair RMx series unit labelled Type 3 or Type 4. The pinout is unique to these models and using the cable on other PSUs can cause damage. Confirm you have a free 6-pin peripheral port on the modular panel. Ensure the three Molex connectors match the devices you intend to power.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product color | Black |
The 6-pin male connector plugs directly into Corsair Type 3 and Type 4 modular PSUs such as the RM550x, RM650x, RM750x, RM850x and RM1000x.
Run the 50 cm section to the first device, then use the flexible 18 AWG wire to bend the two 15 cm tails toward the remaining Molex ports, keeping the angled connectors seated straight.
Replace the cable if the insulation cracks, the tinned copper shows corrosion, or any Molex pin becomes loose enough to cause intermittent power.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?