Lian Li PW-PCI-520X PCIe 5.0 riser cable 200 mm
- PCIe 5.0 Riser Cable
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects three SATA drives to a Corsair Type 4 modular PSU with 18 AWG wiring and 50+15+15 cm lengths
This 18AWG internal power cable splits one 6Pin modular connector into three SATA plugs. It suits builders adding multiple SSDs, hard drives or riser cards to a Corsair Type 3 or Type 4 power supply. The 50cm lead plus two 15cm branches give enough reach for typical drive cages without excess slack. The black UL1007 jacket resists heat and stays flexible for tidy routing.
UL1007 18AWG conductors handle the current required by several SATA devices while running cool under normal loads. The straight 6Pin plug seats firmly in compatible Corsair modular ports, avoiding loose contacts that can cause voltage drop. No active cooling is needed; the cable itself remains at safe temperatures during everyday operation. The empty NC hole in the 6Pin housing matches the standard pinout and does not affect function.
Under continuous drive activity the 18AWG wires maintain stable voltage across all three SATA connectors. The cable is validated for Corsair AXi, HXi, HX, RM, RMi, RMx, RMe, CXM, CSM, TXM and SF series units from 650W to 1500W. Mixing with non-Corsair pinouts is not supported and may cause damage. Builders needing more than three SATA drops or a different modular pinout should use a dedicated cable set.
Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product color | Black |
Plug the 6Pin connector into the PSU's peripheral port, then attach the three SATA plugs to your drives; the empty NC hole on the 6Pin housing is normal and not a defect.
The 18AWG UL1007 wire is heat resistant and not prone to aging, so no routine replacement is expected under normal use.
The 18AWG conductors set the current-carrying limit, so sustained heavy loads on all three drives will hit the wire gauge rating before the connectors do.
More in Internal PSU & Riser Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?