BUCIER 6-pack SATA/SAS cable 0.5 m
Six 0.5 m SATA/SAS cables rated for 6 Gbps, bundled for tidy server or case wiring
Cable Length 0.5m
- 0.5m$18.99
- 1m$22.99
- 6 Gbps transfer speed for fast data movement
- 5 m length keeps server cabling tidy
- Braided nylon sleeve bundles six cables neatly
- Supports SATA and SAS multichannel drives
- 18-month warranty covers the full set
Six-cable SATA/SAS kit for server builds
This BUCIER set supplies six straight-through cables that carry SATA and SAS signals at up to 6 Gbps. Each lead measures .5 metres and is wrapped in a nylon braid so the bundle stays tidy inside a chassis. The pack is aimed at administrators wiring multi-drive arrays or hot-swap backplanes in rackmount or tower servers.
Check port type and cable routing space
Verify that every target device and controller presents a standard 7-pin SATA or SAS connector before ordering. Confirm the .5 metre reach matches the distance between your backplane and host adapter without stretching or sharp bends. Ensure the braided sheath can pass through existing cable-management grommets or tie-down points in your enclosure.
Suits dense multi-drive server deployments
The short length and six-piece count fit builders populating 2.5-inch bays or direct-attach backplanes where excess cable hurts airflow. Buyers needing longer runs for full-tower workstations or external eSATA enclosures should look at something else. The kit also does not address installations that require right-angle or locking connectors.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $18.99
- Pricier than about 70% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
BUCIER Slim Line SAS 4.0 SFF-8654 4i 38pin to HD Mini SAS 4i SFF-8643 36pin Cable 50cm
BUCIER Internal 12G HD Mini SAS SFF-8643 to U.2 SFF-8639 NVMe PCIe SSD Adapter Cable with SATA Power 0.5m
Questions about this item
Does the six-pack include everything needed to connect six SATA drives, or must anything else be purchased?
The set contains six 0.5 m cables with SATA 7-pin connectors, so no additional cables are required for six drives.
Should I choose the 0.5 m length or a longer version for a typical server chassis?
The 0.5 m length suits compact server builds; longer cables are not offered in this listing.
What does the 6 Gbps rating mean when the cables are installed in a live system?
Each cable supports up to 6 Gbps data transfer, matching the SATA 6 Gbps specification for compatible drives and controllers.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
STARTECH SATAPOWADAPR 6 in 4 Pin Molex to Right Angle SATA Power Cable Adapter
- 6 in (15.2 cm)
- no type specified
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
BUCIER SATA-III 1m 4-pack Blue/Black nylon braided 6Gbps data cable
- 6 Gbit/s
- SATA Cables
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
BUCIER 22 Pin SATA Male-to-Female Data Power Cable 30cm
- Male-to-Female
- SATA










