BUCIER SATA cable double 90° 7-pin SAS 6Gbps .5m
Connects SATA drives with double 90-degree angled 7-pin connectors at 6 Gbps over 0.5 m
Cable Length 0.5m
- 0.5m$22.99
- 1m$22.99
- 90° connectors fit tight server bays
- .5 m length reduces cable clutter
- SAS 6 Gbps supports fast storage arrays
- 7-pin SATA works with 2.5" SSDs and 3.5" HDDs
- Data-only cable — drive power supplied separately
BUCIER SATA cable double 90° 7-pin SAS 6Gbps .5m
This BUCIER cable connects motherboards and host controllers to internal SATA or SAS hard drives, SSDs and optical drives. It carries data only and does not supply power, so each drive must be powered separately. The 0.5 metre length suits tight server chassis and RAID arrays.
Sustained data transfer up to 6Gbps
The thin SAS-grade cable supports the full SATA 6Gbps specification, so throughput remains consistent during long sequential reads or writes. Actual speed is limited by the rating of the attached drive and controller. Backwards compatibility with SATA I and SATA II devices is maintained.
Double 90° angled connectors for dense layouts
Both ends feature a 90 degree SATA 7-pin female connector, allowing the cable to run parallel to the drive or motherboard in confined spaces. Four cables are bundled with nylon braiding and labelled P1 to P4 for simple routing in multi-drive or RAID configurations.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Pricier than about 80% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
BUCIER Slim Line SAS 4.0 SFF-8654 4i 38pin to HD Mini SAS 4i SFF-8643 36pin Cable 50cm
BUCIER Internal 12G HD Mini SAS SFF-8643 to U.2 SFF-8639 NVMe PCIe SSD Adapter Cable with SATA Power 0.5m
Questions about this item
Does the .5 m length with 90° connectors help keep the cable cool when it runs all day?
The .5 m length and 90° ends reduce slack and improve airflow around the cable, so heat build-up stays minimal during continuous use.
What must I already have to use this SATA 7-pin cable with my drives?
You need a motherboard or controller with a SATA 7-pin port and a separate power cable for each drive, because this cable carries data only.
Will this 6 Gbps SAS cable work with my older SATA I and SATA II hard drives?
Yes, it is backwards compatible with SATA I and SATA II drives; the transfer speed will be limited by the drive's own rating.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
BUCIER 5Pack SATA III Cable 8 inch Short Thin 0.2M Straight Flexible 6Gb Data Locking Latch
- Sata 7pin
- SATA Cables
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II
BUCIER Mini SAS 36 SFF-8087 to 4 SFF-8482 SATA Power 1m
- 6 Gbit/s
- Sff-8087 to Sff-848…










