BUCIER SATA cable SAS cable 6pcs set 0.5m
Set of six 0.5 m SATA/SAS cables supporting 6 Gbps transfer for server storage
Cable Length 1m
- 0.5m$18.99
- 1m$24.99
- 6 Gbps transfer speed for fast server storage
- Six cables included to connect multiple drives
- 5 m length fits compact chassis layouts
- Braided nylon sleeve keeps cables tidy and improves airflow
- SATA and SAS compatible for versatile drive connections
Six-cable SATA/SAS kit
This BUCIER set supplies six SATA and SAS cables, each .5 metre long, rated for 6 Gbps data transfer. The cables are designed for server use and for connecting multichannel removable hard drives or other 7-pin SATA devices inside a computer case. A braided nylon sheath keeps the bundle tidy and promotes airflow.
Builders who need several short internal links
The pack suits anyone wiring multiple drives in a compact chassis where short, managed cables help cable management. It will not help builders who need longer runs to reach distant drive bays or external enclosures, nor those who require right-angle connectors that are not described in the specifications.
6 Gbps transfer rating
The decisive specification is the 6 Gbps maximum data rate, which matches the SATA 6 Gbps standard and lets each cable handle modern SSD and HDD throughput without bottleneck.
How it compares
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 83% of the 1,954 comparable items (median $13.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
BUCIER Internal 12G HD Mini SAS SFF-8643 to U.2 SFF-8639 NVMe PCIe SSD Adapter Cable with SATA Power 1.0 Meter
BUCIER Slim SAS 4.0 SFF-8654 4i 38pin to HD Mini SAS 4i SFF-8643 36pin Cable 50cm
Questions about this item
How do I route the 0.5 m braided cables so the latch clicks without strain?
Align the 7-pin connector, push straight until the metal latch snaps, then dress the nylon braid with a loose bend radius to avoid pulling the port sideways.
When should I swap out a cable from the 6-piece set?
Replace any cable if the latch no longer holds, the braid frays near the plug, or drives drop at 6 Gbps speeds during sustained transfers.
What length limit appears first on a 0.5 m run at 6 Gbps?
The half-metre length stays well within the SATA 6 Gbps spec, so signal loss is not the limiting factor; connector wear or cable fatigue will show up first.
More in SATA & eSATA Drive Cables
Similar items
STARTECH SATA36RA1 36in Right-Angle SATA Cable
- Cable Connectors
- Red
HP 361391-001 Internal Cable for CD-ROM and Diskette 5 ft
- 5 ft (1.52 m)
- Data Transfer Cable
Nippon Labs SATA3L1.5FT-90/180RD 1.5 ft SATA III cable 90 to 180 degree
- 1.5 ft (0.46 m)
- SATA III
BUCIER SATA to USB 3.0 and USB C Adapter Cable with 12V/2A Power Adapter
- 10.8 Hz
- Plastic
Nippon Labs SATA-1-MINI SATA cable 1m right-angle straight 26 AWG
- 3.28 ft (1m)
- SATA II










