We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 20 cm cable with two black SATA plugs and one yellow 6+2 PCIe socket

EN-Labs

EN-Labs 2SATAPCIE8-20CM Dual SATA to PCIe 8-pin (6+2) Power Cable 8 Inches 18AWG

SKU CH-NWBA-SNSCW

Converts two SATA 15-pin PSU connectors into one PCIe 8-pin (6+2) GPU power plug using 18AWG UL-listed copper wire over 8 inches

  • Connector count3
  • Connector genderMale to Female
  • Cable length0.8 ft (0.24 m)
  • Product typeCable Splitters
  • Product colorMulti-Color
  • Overall length6 in - 10 in

Style 2x SATA

Cable Length 0.8 Feet

  • Powers GPU via dual SATA connectors from PSU
  • 18AWG tinned copper wire handles 12V delivery
  • 6+2 pin design fits 8-pin or 6-pin GPU sockets
  • 8-inch length suits most case layouts
  • UL1007 rated conductors meet safety standards

Dual SATA to PCIe 8-pin cable

This EN-Labs adapter converts two SATA 15-pin power connectors from a power supply into a single PCIe 8-pin (6+2) connector for a graphics card. It is intended for builders whose PSU lacks a native PCIe power lead but has spare SATA outputs available. The cable carries 12 V DC only and uses 18AWG tinned copper wire rated to UL1007.

Easy plug-in install with one caution

Each end is keyed so the connectors fit only one way; press firmly until the latch clicks on both the SATA and PCIe sides. The 8-inch length reaches most GPU positions in standard cases, though tight routing behind a motherboard tray may require careful bending. The 6+2 split on the GPU end lets you use it as either an 8-pin or 6-pin plug without extra adapters.

Check PSU SATA capacity and GPU power draw

Verify your power supply can deliver enough current on its 12 V rail through the SATA connectors; each SATA pin is rated for limited amperage, so high-wattage cards may exceed the safe limit. Confirm the graphics card requires only a single 8-pin or 6-pin input, because this cable provides just one PCIe connector. Ensure the PSU has two unused SATA power leads available before ordering.

How it compares

Measured against everything we stock in Internal PSU & Riser Cables, at today’s prices. Recalculated every night.

Price $5.99
Cheaper than about 94% of the 7,839 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEn-Labs
Model name2SATAPCIE8-20CM
Product typeCable Splitters
Product colorMulti-Color
Design style2x SATA
Ports & slots
Connector count3
Connector genderMale to Female
Size & build
Overall length6 in - 10 in
Cable length0.8 ft (0.24 m)

Other versions of this model

1 more in the same range

Questions about this item

How can I verify the 18AWG cable is delivering stable 12V power to my GPU after connecting the dual SATA plugs to the PSU?

Check that the PCIe 6+2 connector seats firmly into the graphics card and that the system posts without power-related errors; a multimeter on the yellow wires should read 12V DC under load.

What connectors and wire gauge are included with the EN-Labs 2SATAPCIE8-20CM, and is a separate PSU cable required?

The box contains one 8-inch adapter with two SATA 15-pin male plugs and one PCIe 8-pin (6+2) female plug, built with 18AWG tinned copper UL1007 wire; no extra PSU cable is included.

Should I choose the 6-pin or 8-pin side of the 6+2 connector for a card that needs 12V on all eight pins?

Use the full 8-pin (6+2) configuration when the graphics card requires an 8-pin PCIe power input; the extra two pins supply the additional 12V lines the card expects.

More in Internal PSU & Riser Cables

Similar items