We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black SATA cables with locking latches, 10 inch straight connectors

EN-Labs

EN-Labs 5PKSATAIII25CMBK 5-pack SATA cable 10" black locking latch

SKU CH-H758-7WAZ8

Five SATA III cables with locking latches connect drives to motherboards at up to 6 Gbps over 10 inch lengths

  • Rated speed6Gb/s
  • Cable length10 in (25.4 cm)
  • Connector count2
  • Connector details1 x SATA to 1 x SATA
  • Conductor typeCopper Conductor
  • Product typeSATA Data Cable

Cable Length 10 in.

Style Straight

  • 5-pack provides spares for RAID or multiple drives
  • Locking latches on both ends secure each connection
  • 10-inch / 25 cm length fits tight chassis routing
  • SATA 3.0 supports up to 6 Gbps transfer rates
  • Straight 180° connectors align cleanly with motherboard ports

Five-pack SATA III cables with locking latch

This five-pack supplies straight SATA III data cables for connecting motherboards or host controllers to internal hard drives, SSDs or optical drives. The 10 inch length suits compact builds and tight routing paths. Each cable is UL listed and RoHS compliant for regulated environments. Builders adding multiple drives or assembling RAID arrays benefit from the bundled quantity.

Locking latch and straight connectors

A locking latch on both ends secures the connection against vibration and accidental dislodgement during transport or maintenance. The 180 degree straight-to-straight orientation keeps the cable profile low alongside other components. Shielded copper conductors support the 6 Gb/s SATA III specification while maintaining backward compatibility with SATA I and SATA II devices. No power conductors are included, so drives still require separate power cables.

Five cables for spares or multi-drive setups

The pack provides enough cables for a full RAID set or for keeping spares across several systems. Black colour coding helps identify SATA data lines in a crowded chassis. Cables are ready to use without additional software or driver installation. Users needing longer reach or right-angle connectors will need a different cable style.

How it compares

Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.

Price $7.99
Cheaper than about 80% of the 1,954 comparable items (median $13.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Lab
Model name5PKSATAIII25CMBK
Product typeSATA Data Cable
Product colorBlack
Performance
Rated speed6Gb/s
Ports & slots
Connector count2
Connector details1 x SATA to 1 x SATA
Size & build
Overall length10 in (25.4 cm)
Cable length10 in (25.4 cm)
Cable shieldingYes
Conductor typeCopper Conductor

Other versions of this model

5 more in the same range

Questions about this item

What speed does the SATA 3.0 interface cap at with these cables?

The SATA 3.0 interface supports up to 6 Gbps, though actual throughput is limited by the connected drive and controller.

What clearance do the straight 180-degree connectors need to fit?

Each end uses a straight 180-degree SATA plug with a locking latch, so allow enough depth behind the drive and motherboard header for the latch to engage fully.

How do you install the locking latch correctly so it does not come loose?

Push each connector straight in until the metal latch clicks into the port's notch; do not angle the plug, or the latch will not seat and the cable can pull free.

More in SATA & eSATA Drive Cables

Similar items