EN-Labs 5PKSATAIII15CMCL90 5-pack SATA 3.0 cable 6" straight to 90° locking latch clear
- 6 in (15.2 cm)
- SATA Data Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Five clear SATA III cables with locking latches, each 18 inches long for 6 Gbps internal drive connections
Cable Length 18 in.
Style Straight
This pack contains five straight-to-straight SATA III data cables, each 18 inches long with locking latches on both ends. They connect motherboards or host controllers to internal hard drives and optical drives using the SATA interface. The clear jacket makes cable routing easy to inspect in a build.
Use these cables when existing SATA data leads are damaged, too short for a new drive layout, or when adding drives to a RAID array. The 6 Gbps rating matches the SATA 3.0 specification and remains backward compatible with SATA I and II devices. Actual throughput depends on the connected drive and controller.
Align each connector and press until the metal latch clicks into the port, preventing accidental disconnection during case moves or vibration. No tools are required. Remember that these cables carry data only; a separate SATA power cable from the power supply is needed for every drive.
The 18 inch length suits most mid-tower layouts but can fall short in full-tower cases or when routing behind a motherboard tray. Measure the run from controller to drive bay before building. If a latch feels stiff, press the release tab firmly rather than pulling the cable jacket.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | 5PKSATAIII45CMCL |
| Product type | SATA Data Cable |
| Product color | Clear |
| Performance | |
| Rated speed | 6Gb/s |
| Ports & slots | |
| Connector count | 2 |
| Connector details | 1 x SATA to 1 x SATA |
| Size & build | |
| Overall length | 18 in (45.7 cm) |
| Cable length | 1.5 ft (0.46 m) |
| Cable shielding | Yes |
| Conductor type | Copper Conductor |
Other versions of this model
The cable measures 18 inches (45 cm) end-to-end with 180-degree straight connectors on both sides, so allow at least that much straight-line space between the motherboard port and the drive bay.
Align the connector, push straight in until the metal latch clicks into the port's notch, then tug gently to confirm it is seated; forcing it at an angle can bend the latch.
Swap a cable if you see intermittent drive drop-outs, CRC errors in SMART data, or physical damage to the locking latch or copper conductors.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?