EN-Labs SATA18BLACK SATA Cable 18" Black Locking Latch
- 1.5 ft (0.46 m)
- SATA Data Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
100 black 18-inch SATA 3.0 cables with locking latches and 26AWG conductors for 6.0Gbps internal drive connections
Style 100 Packs
This pack contains one hundred black SATA 3.0 data cables, each 18 inches long with 26AWG tinned copper conductors and locking latches on both 7-pin connectors. They connect motherboards or host controllers to internal hard drives, SSDs and optical drives for storage expansion.
The cables support the SATA 3.0 specification with a maximum data rate of 6.0 Gbps and remain backwards compatible with earlier revisions. Actual throughput is limited by the rating of the attached equipment, so sustained performance matches the slowest device in the chain.
Each cable carries data only and does not supply power to the drive, so a separate power connection from the PSU is required for every device. Verify that the motherboard or controller has enough free SATA ports for the number of drives you intend to connect.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | SATA18BLACK |
| Product type | SATA Data Cable |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 18 in (45.7 cm) |
| Cable length | 1.5 ft (0.46 m) |
Other versions of this model
The 26AWG tinned copper conductors carry only data signals, so heat output is negligible even at the full 6.0Gbps rate.
Your board needs standard SATA 7-pin data ports; the cables do not supply power, so each drive still requires a separate SATA power connector from the PSU.
Yes, the connectors are backwards compatible with SATA I and SATA II ports, and the latch engages securely without forcing the older receptacles.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?