EN-Labs SATA18BLACK SATA Cable 18" Black Locking Latch
- 1.5 ft (0.46 m)
- SATA Data Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Pack of fifty 18-inch SATA 3 data cables with locking latches and 26AWG conductors for internal drives
Style 50 Packs
This 50-pack of EN-Labs SATA 3 cables connects motherboards and host controllers to internal Serial ATA hard drives and DVD drives. Each cable measures 18 inches with 26AWG tinned copper conductors and locking latches on both connectors. The black cables are UL listed and RoHS compliant for safe installation.
The SATA Revision 3.0 standard supports data transfer speeds up to 6.0 Gbps, though actual throughput is limited by the rating of the attached equipment. These cables are backwards compatible with SATA I and SATA II devices, but cannot exceed the maximum speed of the slowest connected component. They carry data only and do not supply power to drives.
Verify that your motherboard or controller has available 7-pin SATA data ports and that your power supply provides the required SATA power connectors for each drive. The 18-inch length suits standard chassis layouts, but measure your routing path to confirm reach. This pack is not suited for builders who need right-angle connectors or external eSATA connections.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | SATA18BLACK |
| Product type | SATA Data Cable |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 18 in (45.7 cm) |
| Cable length | 1.5 ft (0.46 m) |
Other versions of this model
The 18 inch length suits typical internal drive bays; choose a longer cable only if your motherboard SATA ports sit far from the drive cage.
The cable supports the SATA 3.0 ceiling of 6.0 Gbps, but real throughput is capped by the drive and controller you attach it to.
It follows the SATA 3.0 specification, so the interface itself tops out at 6.0 Gbps regardless of the drive’s own rating.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?