EN-Labs SATA18BLACK SATA 3 cable 18in black 50 pack
- 1.5 ft (0.46 m)
- SATA Data Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
An 18-inch SATA 3.0 data cable with locking latches and 26AWG tinned copper conductors for 6.0 Gbps internal drive connections
Style 1-Pack
This 18 inch SATA data cable uses 26AWG tinned copper conductors and straight 7-pin connectors with locking latches. It supports the SATA 3.0 specification for transfer rates up to 6.0 Gbps and is backwards compatible with earlier revisions. The black cable is UL listed and RoHS compliant.
The cable connects motherboards or host controllers to SATA hard drives, SSDs, or optical drives where a secure locking connection is desired. It carries data only and does not supply power, so a separate power connection is required. Systems needing right-angle connectors or longer reach should consider a different cable.
The 26AWG conductors and locking latches maintain a stable electrical connection during continuous read or write operations. Signal integrity remains consistent at the rated 6.0 Gbps ceiling without intermittent drops caused by connector movement. Performance is ultimately limited by the speed rating of the attached drive and controller.
Measured against everything we stock in SATA & eSATA Drive Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | EN-Lab |
| Model name | SATA18BLACK |
| Product type | SATA Data Cable |
| Product color | Black |
| Ports & slots | |
| Connector count | 2 |
| Size & build | |
| Overall length | 18 in (45.7 cm) |
| Cable length | 1.5 ft (0.46 m) |
Other versions of this model
It uses a standard 7-pin SATA data header on the motherboard or host controller.
The cable supports up to 6.0 Gbps but will operate at the drive's SATA II speed of 3.0 Gbps.
Each connector clicks audibly and resists a gentle tug when the latch is fully seated.
More in SATA & eSATA Drive Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?