Fervit SFF-8611 Oculink SFF-8612 to U.2 U.3 SFF-8639 NVME SSD Adapter

Fervit Oculink SFF-8611 Adapter

This Fervit adapter connects an OCuLink SFF-8612 female port to a U.2 or U.3 SFF-8639 female connector. It is built for system integrators adding enterprise NVME storage to boards with OCuLink headers. The compact vertical layout fits tight spaces around the motherboard socket. A SATA power input supplies the attached drive.

Signal support up to 64Gbps

The card passes PCI Express 4.0 and 5.0 signals using the NVME 1.2 protocol at up to 64Gbps. That bandwidth ceiling is the single figure that decides whether the link matches your drive and controller. No active components sit in the path, so latency stays at the cable level. Verify your endpoint and host both signal at the required generation.

Vertical plug eases tight installs

The right-angle SFF-8639 receptacle lets you seat the adapter even when surrounding components leave little clearance. Route the optional OCuLink cable away from the board to avoid stress on the connector. Remember that the adapter itself draws no auxiliary power; the drive receives power solely through the SATA lead. Misaligned insertion can bend the dense SFF-8639 pins.