Jansicotek A0108 DisplayPort 2.1 Cable 10 ft 80Gbps 16K@60Hz
- 10 ft (3.05 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 16 ft DisplayPort 2.1 cable delivering 80 Gbps for 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz with HDR and triple shielding
Cable Length 16.5 Feet
This 16 ft cable carries DisplayPort 2.1 signals at up to 80 Gbps. It connects a graphics card or laptop to a monitor, projector or television with a standard DisplayPort input. The male-to-male connectors and triple-shielded solid copper construction keep the link stable at the highest specified resolutions.
A cable rated for DisplayPort 1.4 cannot deliver 16K at 60 Hz or 8K at 120 Hz without compression. This cable removes that bottleneck for users moving to 10K, 8K or 16K panels, or for 4K screens running at 144 Hz, 165 Hz or 240 Hz. It is not for builders who need longer runs than 16 ft or who require angled connectors for tight spaces.
The 80 Gbps ceiling means 16K at 60 Hz relies on DSC 1.2a compression, while 8K at 120 Hz and 4K at 240 Hz can run uncompressed. HDR, HDCP 2.2 and variable refresh rate work within the same bandwidth envelope. The standard does not define power delivery, so separate power cables are still required for the display.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | A0108 |
| Product type | DisplayPort Cable |
| Product color | Black |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K(15360 × 8640) 60 Hz with DSC, 8K 120 Hz, 4K 240 Hz/165 Hz/120 Hz/144 Hz Support |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.1 |
| Destination connector | 1 x DisplayPort2.1 |
| Connector details | DisplayPort to DisplayPort 2.1 Cable 16K@60 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 16 ft (4.88 m) |
| Cable length | 16 ft (4.88 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
The cable is 16 ft long with male-to-male DisplayPort 2.1 connectors; allow enough clearance for the 16.5 ft total run and the connector depth at each end.
Connect the male DisplayPort 2.1 ends firmly into the source and display ports until the latches click; verify the monitor and GPU both support the target resolution and refresh rate, then enable DSC 1.2a in the driver if required.
Replace it if the latches break, the jacket is kinked or cut, or you see intermittent signal loss, flicker, or failure to negotiate 80 Gbps link rates such as 8K@120 Hz or 4K@240 Hz.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?