STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts HDMI 1.3 signals up to 1080P to composite 480i/576i video with stereo audio via a 120cm all-in-one cable
This Jansicotek adapter converts digital HDMI signals to analogue RCA composite video and stereo audio for older displays. The 120 cm all-in-one cable integrates the converter chipset so no separate power supply or extra cables are required. It suits users connecting streaming sticks, games consoles or PCs to legacy TVs, VCRs or DVD recorders that only accept RCA inputs.
The converter draws power directly from the HDMI source port, so it adds no mains load and generates negligible heat during normal use. No fan or active cooling is present, making the device completely silent. Power consumption stays within the HDMI 1.3 port budget, leaving headroom for the source device.
A short HDMI female coupler is included, allowing two HDMI cables to be joined if the source is farther from the converter than the fixed 120 cm lead permits. The user manual explains the NTSC and PAL output modes and notes that 3D signals are not supported. No driver installation or configuration software is supplied or needed.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI to Composite |
| Audio & video | |
| Sound | Yes |
| Ports & slots | |
| First connector | 1x HDMI |
| Second connector | 1 × 3RCA |
| In the box | |
| In the box | 1x HDMI to RCA Converter Cable, 1 x HDMI Female Coupler, User Manual. |
Connect the HDMI plug to your source device and the three RCA plugs to the display, then use the included HDMI female coupler if the source cable is too short; the step often missed is ensuring the source outputs 480i, 576i or 1080P so the built-in chipset can convert it.
No internal parts require servicing; only the 120 cm cable and connectors may wear over time, so replace the whole unit if the plug contacts loosen or the cable sheath frays.
The output is fixed at standard-definition 480i or 576i composite video, so extended sessions cannot exceed that resolution regardless of the 1080P input capability.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?