Jansicotek OZF8K2 1×3 HDMI Splitter 8K@60Hz 4K@120Hz audio

Splitter for three simultaneous displays

The Jansicotek OZF8K2 duplicates a single HDMI source across three screens at once. It accepts 8K at 60 Hz and 4K at 120 Hz input, then mirrors that signal to every connected display. The unit is aimed at installers and home users who need identical content on multiple TVs or projectors without running separate source devices. No software setup is required; power it and connect the cables.

Sustained 48 Gbps bandwidth with EDID management

Rated for 48 Gbps throughput, the splitter maintains full HDMI 2.1 bandwidth during continuous operation rather than only in short bursts. Smart EDID management negotiates capabilities with each sink so the source sees a single, compatible display profile. A built-in down-scaler allows mixed-resolution sinks to each receive their highest supported format without forcing the whole chain to the lowest common denominator. HDCP 2.3 and earlier versions pass through transparently.

Fanless aluminium enclosure runs silent

The aluminium alloy housing dissipates heat passively, so the device adds no audible noise to a living-room or meeting-room setup. Power draw is limited to the included DC 5 V adapter, keeping cabling simple and avoiding the need for a high-wattage supply. Input cables up to 16 ft and output cables up to 10 ft are supported for a total run of 26 ft without signal degradation. The compact 5.59 by 3.15 by 1.26 inch form factor fits behind most displays.