Jansicotek BK-CD2 USB-C to DisplayPort 1.4 cable 6.6 ft 32.4 Gbps 8K 60 Hz 4K 144 Hz 2K 240 Hz HDR
- 6.6 ft (2.01 m)
- DisplayPort Cable
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects DisplayPort 2.1 devices at up to 80 Gbps for 16K at 30 Hz, 8K at 120 Hz or 4K at 240 Hz
The Jansicotek TJ-A285BK is a 10 ft DisplayPort 2.1 cable built for 80 Gbps bandwidth. It connects graphics cards to monitors that demand 16K at 30 Hz, 8K at 120 Hz or 4K at 240 Hz. The male-to-male design suits gamers and creators who need a single long link without adapters.
Triple shielding and a 28 AWG solid copper conductor keep the signal stable during extended gaming or rendering sessions. The aluminum shell dissipates heat so performance does not degrade over time. Rated for more than 15,000 bend cycles, the braided jacket resists wear in tight routing paths.
Bandwidth tops out at 80 Gbps with DSC 1.2a, so the cable only delivers its highest resolutions when both the source and the display support DisplayPort 2.1 and Display Stream Compression. Buyers whose hardware stops at DisplayPort 1.4 will not reach 16K or 4K at 240 Hz.
Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Jansicotek |
| Model name | TJ-A285BK |
| Product type | DisplayPort Cable |
| Product color | Black |
| Performance | |
| Rated speed | Test Value |
| Display | |
| Refresh frequency | 16K@30 Hz, 8K@60 Hz/120 Hz, 4K@144 Hz, 4K@165 Hz, 2K@360 Hz |
| Ports & slots | |
| Connector count | 1 |
| Source connector | 1 x DisplayPort2.1 |
| Destination connector | 1 x DisplayPort2.1 |
| Connector details | DisplayPort to DisplayPort 2.1 Cable 16K@30 Hz |
| Connector gender | Male to Male |
| Size & build | |
| Overall length | 10 ft (3.05 m) |
| Cable length | 10 ft (3.05 m) |
| Cable shielding | Triple-shielded |
| Conductor type | Solid Copper Conductor |
| Build details | Test123 |
| Compatibility | |
| Supported platforms | Works with Windows Vista |
Other versions of this model
The premium aluminium shell is designed to dissipate heat effectively, so the cable stays cool even during extended high-bandwidth sessions.
Both devices need a DisplayPort 2.1 (or backward-compatible 2.0, 1.4, 1.3, 1.2, 1.1, 1.0) male connector; the cable is male-to-male and carries video, audio and HDR data.
The cable is backward compatible with DisplayPort 1.4, but 4K 240 Hz requires DisplayPort 2.1 bandwidth; on a 1.4 port you will be limited to that version's maximum resolution and refresh rate.
More in DisplayPort Monitor Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?