We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort 1.4 cable with male connectors on both ends, 10 ft long

Jansicotek

Jansicotek LJ-DP8K DisplayPort 1.4 cable 10 ft 8K 60Hz 4K 144Hz HBR3 32.4 Gbit/s

SKU CH-XXJR-RWDAV

A 10 ft DisplayPort 1.4 cable rated for 32.4 Gbit/s HBR3 bandwidth, supporting 8K 60 Hz, 4K 144 Hz and 2K 240 Hz with HDR, HDCP 2.2 and MST

  • Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz, 5K (5120 × 2880) @ 60 Hz /
  • Rated speedTest Value
  • Cable length10 ft (3.05 m)
  • Connector count1
  • Source connector1 x DisplayPort 1.4
  • Destination connector1 x DisplayPort 1.4
  • Transmit 8K at 60 Hz with 32.4 Gbit/s HBR3 bandwidth
  • Drive 4K at 144 Hz for smooth high-refresh gaming
  • Triple-shielded solid copper conductors reduce signal loss
  • Backward compatible with DisplayPort 1.3, 1.2, 1.1a and 1.0
  • Supports HDR, HDCP 2.2, MST and DSC for advanced features

Ten-foot DisplayPort 1.4 link

This ten-foot cable carries a DisplayPort 1.4 signal between two male connectors. It is built for monitors and graphics cards that support the HBR3 bandwidth tier and need a three-metre reach without an active extender. The triple-shielded design uses solid tinned-copper conductors to keep the 32.4 Gbit/s pipe clean over the full length.

Sustained 32.4 Gbit/s throughput

HBR3 rating means the link holds the full 32.4 Gbit/s during long gaming or render sessions, not just in short bursts. Forward error correction and HDCP 2.2 handshake remain stable when the panel runs at 4K 144 Hz or 8K 60 Hz for hours. Triple shielding prevents electromagnetic drift that can drop frames under continuous load.

Replaces shorter or legacy DP cables

Swapping a one-metre or DisplayPort 1.2 cable for this ten-foot HBR3 link unlocks 4K 144 Hz, 2K 240 Hz or 8K 60 Hz on compatible hardware. The upgrade is worth it when the desk layout demands extra reach and the monitor or GPU already supports DSC, MST or 32 audio channels over DisplayPort 1.4.

How it compares

Measured against everything we stock in DisplayPort Monitor Cables, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 60% of the 3,804 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameJansicotek
Model nameLJ-DP8K
Product typeDisplayPort Cable
Product colorBlack
Performance
Rated speedTest Value
Display
Refresh frequency8K (7680 × 4320) @ 60 Hz / 30 Hz,
5K (5120 × 2880) @ 60 Hz / 30 Hz,
4K (4096 × 2160) @ 144 Hz / 120 Hz/60 Hz/30 Hz,
2K (2560 × 1440) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
1080p (1920 × 1080) @ 240 Hz / 165 Hz/144 Hz/120 Hz/60 Hz/30 Hz,
Ports & slots
Connector count1
Source connector1 x DisplayPort 1.4
Destination connector1 x DisplayPort 1.4
Connector detailsDisplayPort to DisplayPort 1.4 Cable 8K@60 Hz
Connector genderMale to Male
Size & build
Overall length10 ft (3.05 m)
Cable length10 ft (3.05 m)
Cable shieldingTriple-shielded
Conductor typeSolid Copper Conductor
Build detailsTest123
Compatibility
Supported platformsWorks with Windows Vista

Other versions of this model

5 more in the same range

Questions about this item

Does the 10 ft cable generate any heat or draw extra power during all-day 8K 60 Hz use?

The cable is a passive copper link with no active electronics, so it produces no measurable heat and draws no power beyond the negligible signal current from the DisplayPort source.

What must my graphics card and monitor already provide for this cable to deliver 4K 144 Hz?

Both devices need a DisplayPort 1.4 port that supports HBR3 bandwidth and DSC compression; the cable itself is backward compatible with DisplayPort 1.3, 1.2, 1.1a and 1.0.

Will this cable work reliably with a monitor that only has DisplayPort 1.2?

Yes, the cable is backward compatible with DisplayPort 1.2, 1.1a and 1.0, so it will carry 4K 60 Hz or 1440p 144 Hz on older ports without any configuration.

More in DisplayPort Monitor Cables

Similar items