KingSpec NT-512-2280 512GB M.2 2280 SATA internal SSD
- Internal SSD
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Compact M.2 2242 SATA SSD delivering 1 TB capacity with sequential reads up to 570 MB/s and writes up to 540 MB/s for faster boot and app loading
Model NT-1TB-2242
The KingSpec NT-1TB-2242 is a 1TB internal solid-state drive built in the M.2 2242 form factor. It connects through a SATA interface and uses 3D NAND flash memory. The drive is designed for consumer desktops, laptops and ultrabooks that accept a 22 mm by 42 mm SATA module.
This drive fits systems with an M.2 slot wired for SATA signalling, such as certain Lenovo ThinkPad, HP ProBook and ASUS Vivobook models. It delivers sequential reads up to 570 MBps and writes up to 540 MBps with random performance of 24,300 read IOPS and 6,400 write IOPS. Devices limited to PCIe signalling cannot use this module.
The decisive specification is the SATA interface combined with the 2242 dimensions. Buyers must verify their motherboard or laptop provides a SATA-wired M.2 slot of this length; a PCIe-only slot will not work. Power draw is 0.58 W idle and 1.5 W active, with an operating range of 0 °C to 70 °C.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | KingSpec |
| Product line | NT 2242 Series |
| Model name | NT-1 TB-2242 |
| Part number | NT-1 TB-2242 |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 570 MB/s |
| Sequential write speed | Up to 540 MB/s |
| Random read (4K) | Up to 24,300 IOPS |
| Random write (4K) | Up to 6,400 IOPS |
| Storage | |
| NAND flash type | 3D NAND |
| Ports & slots | |
| Interface type | SATA NGFF |
| Power | |
| Idle power draw | 0.58 W |
| Active power draw | 1.5 W |
| Size & build | |
| Form factor | M.2 2242 |
| Heat sink | Without HeatSink |
| Overall height | 42.0 mm |
| Overall width | 22.0 mm |
| Product depth | 3.5 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -20 °C to 75 °C |
| Operating humidity range | 5%-95% RH non-condensing |
| More details | |
| Mean time between failures | 1,000,000 h |
Other versions of this model
The drive is supplied as a bare M.2 2242 module. A mounting screw and any adapter bracket are not included and must be sourced separately.
This model is offered in a single 1TB capacity, so no capacity selection is required.
It represents the peak SATA 6 Gbps throughput for large file transfers; real-world speeds will be lower depending on the system and workload.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?