We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board M.2 2280 SATA SSD with black label and gold edge connector

KingSpec

KingSpec NT-1TB-2280 1TB internal SSD M.2 2280 SATA

SKU CH-DWDY-M10NP MPN NT-1TB-2280

A 1 TB SATA M.2 2280 internal SSD delivering up to 570 MB/s read and 540 MB/s write speeds with 3D NAND and a 1,000,000-hour MTBF

  • Total capacity1 TB
  • Sequential read speedUp to 570 MB/s
  • Sequential write speedUp to 540 MB/s
  • Interface typeSATA III
  • Form factorM.2 2280
  • Product typeInternal Solid State Drive (SSD)

Model NT-1TB-2280

  • Up to 570 MB/s sequential read speeds accelerate boot and file access
  • Up to 540 MB/s sequential write speeds keep large transfers moving
  • 58,800 random read IOPS and 62,500 write IOPS sharpen everyday responsiveness
  • 1,000,000 hours MTBF and no moving parts protect data through heavy use
  • 5 W idle draw and 0–70 °C operating range suit thin laptops and desktops

M.2 2280 SATA 1TB drive

The KingSpec NT-1TB-2280 is an internal solid-state drive in the M.2 2280 form factor with a 1TB capacity. It connects through the SATA III interface and uses 3D NAND memory components. The drive is designed for consumer desktops, laptops and ultrabooks that have an M.2 SATA slot.

Suits SATA M.2 slots, not PCIe

This SSD suits systems with an M.2 slot wired for SATA signalling and a 2280-length bay. It delivers up to 570 MBps sequential read and 540 MBps sequential write with 58,800 IOPS random read and 62,500 IOPS random write. Builders whose platform only supports PCIe signalling cannot use this drive.

SATA III interface decides compatibility

The single specification that decides fit is the SATA III interface on an M.2 2280 connector. The motherboard or laptop must provide a SATA-wired M.2 slot; a PCIe-only slot will not work. No other interface is supported by this model.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $105.99
Cheaper than about 70% of the 1,994 comparable items (median $180.49).
Total capacity 1 TB
Typical for this category: the median of 1,368 items is 1 TB.
Sequential read speed Up to 570 MB/s
Lower than about 60% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $105.99 per TB
Cheaper than about 82% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameKingSpec
Product lineNT 2280 Series
Model nameNT-1 TB-2280
Part numberNT-1 TB-2280
Total capacity1 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 570 MB/s
Sequential write speedUp to 540 MB/s
Random read (4K)Up to 58,800 IOPS
Random write (4K)Up to 62,500 IOPS
Storage
NAND flash type3D NAND
Ports & slots
Interface typeSATA III
Power
Idle power draw1.5 W
Size & build
Form factorM.2 2280
Heat sinkWithout HeatSink
Overall height3.5 mm
Overall width22 mm
Product depth80 mm
Product weight50g
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-20 °C to 75 °C
Operating humidity range10% to 95% RH non-condensing
More details
Mean time between failures1,000,000 h

Other versions of this model

5 more in the same range

Questions about this item

Will the M.2 2280 SATA drive work in a laptop that only has an older SATA 3 Gbps port?

Yes, the SATA III interface is backward compatible with SATA 3 Gbps ports, though sequential speeds will be limited to the older port's maximum throughput.

How can I verify the drive is delivering the rated 570 MBps read and 540 MBps write speeds after installation?

Run a benchmark tool such as CrystalDiskMark using a 1 GiB test file on an empty partition; results should approach the rated sequential figures.

Does the NT-1TB-2280 include a cooling sticker or mounting screw, or must I buy them separately?

A cooling sticker is included; a mounting screw is not supplied and must be sourced from the system manufacturer or a hardware kit.

More in Internal NVMe & SATA SSDs

Similar items