We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular circuit board with gold edge connector and black chips, 22 by 80 millimetres, no heatsink

KingSpec

KingSpec NT-2TB-2280 2TB M.2 2280 SATA internal SSD

SKU CH-ZQW1-QAHJD MPN NT-2TB-2280

A 2TB M.2 2280 SATA internal SSD with 3D NAND, sequential reads up to 580 MBps and writes up to 550 MBps, plus 58,800 random read and 62,500 random write IOPS

  • Total capacity2 TB
  • Sequential read speedUp to 580 MB/s
  • Sequential write speedUp to 550 MB/s
  • Interface typeSATA III
  • Form factorM.2 2280
  • Product typeInternal Solid State Drive (SSD)

Model NT-2TB-2280

  • 2 TB capacity stores large game libraries and media archives
  • sequential read up to 580 MBps loads apps and levels quickly
  • sequential write up to 550 MBps saves big files without lag
  • 1 000 000 hours MTBF gives long-term data confidence
  • 5 W idle draw keeps laptop battery drain low

KingSpec NT 2TB SATA SSD

The KingSpec NT-2TB-2280 is a 2TB M.2 2280 internal SSD that uses the SATA interface and 3D NAND memory. It is built for consumer desktops, laptops and ultrabooks that have an M.2 SATA slot and need a large, quiet storage upgrade.

2TB capacity with SATA headroom

The drive delivers up to 580 MBps sequential read and 550 MBps sequential write, with 4KB random read up to 58,800 IOPS and random write up to 62,500 IOPS. That throughput handles operating systems, applications and media libraries comfortably, while the SATA 6Gbps link caps peak transfer rates at the interface limit.

M.2 2280 SATA fit and power

The 22mm by 80mm module fits standard M.2 2280 sockets keyed for SATA and draws 1.5W at idle. It operates from 0°C to 70°C and stores safely from -20°C to 75°C at 5 to 95 percent humidity. A bundled cooling sticker assists thermal management, and the drive supports S.M.A.R.T. and intelligent error correction for ongoing health monitoring.

How it compares

Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.

Price $168.99
Typical for this category: the median of 1,994 items is $180.49.
Total capacity 2 TB
Higher than about 70% of the 1,368 comparable items (median 1 TB).
Sequential read speed Up to 580 MB/s
Lower than about 60% of the 1,180 comparable items (median 2,400 MB/s).
Price per TB $84.50 per TB
Cheaper than about 91% of the 1,362 comparable items (median $165.50 per TB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameKingSpec
Product lineNT 2280 Series
Model nameNT-2 TB-2280
Part numberNT-2 TB-2280
Total capacity2 TB
Product typeInternal Solid State Drive (SSD)
Intended useConsumer
Performance
Sequential read speedUp to 580 MB/s
Sequential write speedUp to 550 MB/s
Random read (4K)Up to 58,800 IOPS
Random write (4K)Up to 62,500 IOPS
Storage
NAND flash type3D NAND
Ports & slots
Interface typeSATA III
Power
Idle power draw1.5 W
Size & build
Form factorM.2 2280
Heat sinkWithout HeatSink
Overall height80 mm
Overall width22 mm
Product depth3.5 mm
Product weight50g
Environment & compliance
Operating temperature range0 °C to 70 °C
Storage temperature range-20 °C to 75 °C
Operating humidity range5% to 95% RH non-condensing
More details
Mean time between failures1,000,000 h

Other versions of this model

5 more in the same range

Questions about this item

Will the 2280 SATA SSD work in my older laptop that only has a SATA III 6Gbps M.2 slot?

Yes, the drive uses the SATA III 6Gbps interface and the 2280 form factor, so it fits and communicates with any M.2 slot wired for SATA.

How can I verify the drive delivers the rated 580 MBps read and 550 MBps write after installation?

Run a sequential benchmark such as CrystalDiskMark; sustained reads near 580 MBps and writes near 550 MBps confirm the drive is performing to specification.

Does the box include a cooling sticker or heatsink, or must I buy one separately?

A cooling sticker is included; the product ships without a heatsink.

More in Internal NVMe & SATA SSDs

Similar items