KingSpec NT-512-2280 512GB M.2 2280 SATA internal SSD
- Internal SSD
- Consumer
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
2TB M.2 2242 SATA SSD with 3D NAND delivering 550 MB/s read and 500 MB/s write for faster boot and application load times
Model NT-2TB-2242
The KingSpec NT-2TB-2242 is a 2TB internal solid-state drive built in the M.2 2242 form factor. It connects via a SATA interface and uses 3D NAND flash memory. This drive suits desktops, laptops and ultrabooks that require the shorter 2242 module length for storage upgrades.
The drive draws 0.58W at idle and 1.5W during active operation. It operates between 0°C and 70°C without a heatsink and produces no audible noise. Low heat generation and fast heat dissipation keep temperatures stable during typical workloads.
Sequential reads reach up to 550 MBps and writes up to 500 MBps over the SATA 6Gbps link. These figures represent the practical throughput limit of the interface and determine whether the drive meets the performance needs of a SATA-based system.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | KingSpec |
| Product line | NT 2242 Series |
| Model name | NT-2 TB-2242 |
| Part number | NT-2 TB-2242 |
| Total capacity | 2 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 550 MB/s |
| Sequential write speed | Up to 500 MB/s |
| Random read (4K) | Up to 24,300 IOPS |
| Random write (4K) | Up to 6,400 IOPS |
| Storage | |
| NAND flash type | 3D NAND |
| Ports & slots | |
| Interface type | SATA NGFF |
| Power | |
| Idle power draw | 0.58 W |
| Active power draw | 1.5 W |
| Size & build | |
| Form factor | M.2 2242 |
| Heat sink | Without HeatSink |
| Overall height | 42 mm |
| Overall width | 22 mm |
| Product depth | 3.5 mm |
| Product weight | 30g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -20 °C to 75 °C |
| Operating humidity range | 5%-95% RH non-condensing |
| More details | |
| Mean time between failures | 1,000,000 h |
Other versions of this model
The drive measures 22 mm wide by 42 mm long, so it fits any M.2 2242 slot that accepts SATA devices.
Yes, the drive uses the SATA III 6 Gbps interface, so the host must provide a SATA‑wired M.2 connector.
Idle draw is 0.58 W and active draw is 1.5 W, keeping heat and battery impact low.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?