STARTECH DP2DVI2 DisplayPort to DVI passive audio video converter 1080p 1920x1200
- 6 in (15.2 cm)
- 1x DVI-I female
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Converts HDMI sources to YPbPr component video with stereo audio for legacy displays, supporting 480p, 576p, 720p and 1080i/p at 50/60Hz
This LUOM adapter converts an HDMI source into analog YPbPr component video with stereo R/L audio. It is aimed at owners of older TVs, projectors or monitors that lack HDMI but retain component inputs. The aluminium-cased unit is powered from an included 5 V supply and requires no drivers.
Verify that the sending device outputs HDMI and that the receiving screen accepts YPbPr on five RCA sockets, not composite video on three. The converter handles 480p at 60 Hz, 576p at 50 Hz, 720p at 50 or 60 Hz and 1080i or 1080p at 50 or 60 Hz, passing each resolution through unchanged. It does not scale signals and cannot operate in reverse from component to HDMI.
The 5 V DC adapter powers the conversion circuitry so the box works without drawing current from the HDMI port. A short user guide explains the single-direction connection and the supported resolution list. No additional cables, scaling software or HDCP management tools are included.
Measured against everything we stock in Video Signal Converters, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Product type | HDMI to YPbPr 5RCA RGB Adapter |
| Audio & video | |
| Sound | Yes |
| Ports & slots | |
| First connector | 1x HDMI |
| Second connector | 1 x YPbPr 5RCA |
| In the box | |
| In the box | 1 x HDMI to Component Converter 1 × 5 V DC Power Supply 1 x User Manual |
The box includes the converter, a 5 V DC power supply and a user manual. You must supply your own HDMI cable and a 5-RCA component cable (YPbPr video plus red/white audio) to complete the connection.
Set the source to one of the listed input resolutions — 480p at 60 Hz, 576p at 50 Hz, 720p at 50 or 60 Hz, or 1080i/p at 50 or 60 Hz. The converter passes the signal through at the same resolution without scaling.
It means the unit accepts a 1080p 60 Hz HDMI signal and outputs a matching 1080p 60 Hz YPbPr component signal with stereo audio, provided the display also supports that mode. HDCP 1.2 content is supported.
More in Video Signal Converters
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?