STARTECH MU6MMS2RA 3.5mm Right Angle Stereo Cable 6 ft
- Cable Connectors
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Connects balanced XLR sources to unbalanced RCA inputs using 16 AWG oxygen-free copper conductors with gold-plated connectors and 97.5 percent braid shielding
This 10ft cable converts a balanced XLR signal into an unbalanced RCA signal, or the reverse, using standard pinout wiring. It is built for installers and home-studio owners who need to connect professional microphones, mixers or interfaces to consumer-grade amplifiers, recorders or sound cards. The oxygen-free copper conductors and full-length shielding preserve signal integrity across the run.
The twisted-pair construction and copper-braid shield with 97.5 percent coverage reject electromagnetic and radio-frequency interference along the entire 3.048 metre length. Gold-plated contacts maintain low-resistance connections after repeated mating cycles. The 16 AWG stranded conductors keep voltage drop negligible for line-level audio, so the cable behaves consistently whether the run is short or near its maximum reach.
Because the RCA endpoint is inherently unbalanced, the completed link cannot reject common-mode noise the way a fully balanced XLR-to-XLR connection would. Users who require true balanced transmission over long distances or in electrically noisy environments will need a different cable topology. The standard pinout ties XLR pins 1 and 3 to the RCA sleeve and pin 2 to the tip, fixing the signal reference to ground at the RCA end.
Measured against everything we stock in 3.5mm Aux Audio Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Monoprice |
| Model name | 104778 |
| Product type | Others |
| Ports & slots | |
| Connector count | 2 |
| Connector gender | Male to Male |
The cable is passive with no active electronics, so it generates no heat and makes no noise regardless of how long it is used. The 16 AWG oxygen-free copper conductors and 97.5% copper braid shield only carry the audio signal.
You need a source device with a female XLR output — such as a microphone, mixer, or audio interface — and a destination device with a female RCA input like a recorder, amplifier, or powered speaker.
Pins 1 and 3 of the XLR plug tie to the RCA shield while pin 2 carries the signal, so the balanced source becomes unbalanced at the RCA end; older RCA equipment receives a standard unbalanced audio signal without modification.
More in 3.5mm Aux Audio Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?