We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, no heat spreaders, gold contacts, black PCB, 288 pins

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 ECC RDIMM memory upgrade for Supermicro H14DSG-OM

SKU CH-Z21D-K5E60

192 GB DDR5-5600 registered ECC RDIMM kit (2 × 96 GB, CL46, 1.1 V) validated for Supermicro H14DSG-OM motherboards

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 30 more
  • 192 GB capacity in a 2 x 96 GB kit for large memory workloads
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • ECC and registered design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation at CL46 latency matches the board's memory controller specs
  • Verified fit for Supermicro H14DSG-OM with 288-pin RDIMM form factor

192GB DDR5-5600 ECC RDIMM Kit

This 192GB kit contains two 96GB DDR5-5600 registered ECC modules built to the exact voltage, rank and timing the Supermicro H14DSG-OM memory controller expects. The 2Rx4 organisation and CL46 latency let the board recognise full capacity and run at rated speed without manual tuning.

Suited for dense memory configs.

The registered buffer and ECC logic are mandatory for this motherboard, so the kit works in fully populated servers that need error correction and signal stability. Builders using consumer boards, laptops or any platform that requires unbuffered UDIMM or SODIMM modules cannot use these DIMMs.

288-pin RDIMM form factor decides fit

Only motherboards wired for 288-pin DDR5 registered DIMMs will accept this kit; the key notch and electrical signalling differ from UDIMM, SODIMM and previous DDR generations. Check the H14DSG-OM manual for approved population order before installing.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,746.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $29.93 per GB
Pricier than about 85% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the kit include only the two 96GB RDIMMs or are any extra brackets or cables required?

The kit contains two 96GB DDR5 5600 CL46 1.1V 288-pin ECC Registered RDIMMs and nothing else.

Should I pick the 192GB 2Rx4 kit or look for a different capacity or rank for the H14DSG-OM?

This 192GB kit uses the exact 2Rx4 registered ECC configuration the H14DSG-OM memory controller expects for full-capacity recognition at rated speed.

Will the modules run at 5600 MT/s CL46 once installed in the Supermicro H14DSG-OM?

Yes, the kit is spec-matched to the board so each DIMM operates at DDR5-5600 with CL46 timing at 1.1V when populated per the manual.

More in Model-Specific Memory Upgrades

Similar items