We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 2Rx8 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-8YAD-VV2GW

32 GB DDR5-5600 registered ECC RDIMM built to the exact rank, voltage and timing the Supermicro H14DSG-OM expects

  • Total capacity32 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB

Show 30 more
  • 32 GB DDR5-5600 capacity for high-density server workloads
  • CL46 latency and 1.1 V operation matching the memory controller spec
  • 2Rx8 registered ECC RDIMM architecture for full-slot stability and error correction
  • 288-pin form factor verified for Supermicro H14DSG-OM motherboard fitment
  • Built with major OEM Samsung, Micron or Hynix DRAM chips

Exact-match DDR5-5600 ECC RDIMM for Supermicro

This 32 GB registered DDR5 module runs at 5600 MT/s (PC5-44800) with CL46 latency at 1.1 V. The 2Rx8 organization matches the memory controller expectations of the Supermicro H14DSG-OM motherboard so the system recognizes the full capacity and operates at the rated speed without manual tuning.

Sustained-load stability

Registered buffering reduces electrical load on the memory controller, allowing every populated slot to run at full rated frequency continuously. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during long-running server workloads such as virtualization, databases or compute clusters.

Verify DIMM population rules

Server memory validation varies by motherboard revision and BIOS version. Consult the Supermicro H14DSG-OM manual for approved DIMM population order, maximum capacity per channel and any required firmware updates before ordering. This module is a 288-pin RDIMM and is not compatible with UDIMM or SODIMM slots.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,030.99
Pricier than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $32.22 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K1
Total capacity32 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 1.10V DDR5 5600 module run hot or draw much power in a fully populated Supermicro H14DSG-OM?

DDR5 at 1.10V is the standard operating voltage; registered architecture offloads the memory controller so every slot can stay fully populated at rated speed without extra voltage.

Will this 288-pin RDIMM work in my Supermicro H14DSG-OM without any other parts?

The module matches the board's required 288-pin RDIMM form factor, 2Rx8 rank, CL46 timing and 1.10V voltage, so it installs directly into the motherboard slots.

Can I mix this 2Rx8 CL46 RDIMM with older DDR5 sticks already in the H14DSG-OM?

Mixing ranks or timings can prevent the server from running at full capacity; consult the motherboard manual for approved population rules before adding this module.

More in Model-Specific Memory Upgrades

Similar items