We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM module with black chips, gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 5600 CL46 2Rx8 ECC RDIMM Supermicro H13SVW-N memory upgrade

SKU CH-2DTM-F75N5

48 GB DDR5 5600 RDIMM with ECC and registered buffering, validated for Supermicro H13SVW-N motherboards

  • Total capacity48 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 48GB

Show 12 more

Speed 5600MHz

  • Exact 48GB DDR5-5600 RDIMM match for Supermicro H13SVW-N
  • 2Rx8 registered ECC design keeps every slot stable at full capacity
  • CL46 latency at 1.1V meets the board's rated timing
  • Major OEM chips (Samsung, Micron, Hynix) deliver enterprise-grade reliability
  • Lifetime replacement warranty with free US-based technical support

Exact-match DDR5-5600 RDIMM

This 48GB module runs at DDR5 5600 with CL46 latency and 1.10V voltage. It uses a 2Rx8 registered ECC design built for the Supermicro H13SVW-N motherboard. The part number MR44800-4828K1 identifies the exact specification the board expects.

Registered ECC with 2Rx8 rank

The single specification that decides fit is the 2Rx8 registered ECC configuration. The board's memory controller requires registered DIMMs with this rank structure and ECC enabled. A UDIMM, SODIMM or non-ECC module will not be recognised or will run at reduced capacity.

Straightforward slot installation

Align the 288-pin key with the DDR5 RDIMM slot and press until the latches click. The registered buffer allows full population without signal degradation. The most common issue is ignoring the motherboard manual's population order, which can leave capacity unrecognised or the system unbootable.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,274.99
Pricier than about 63% of the 21,161 comparable items (median $397.99).
Total capacity 48 GB
Higher than about 55% of the 20,941 comparable items (median 32 GB).
Price per GB $26.56 per GB
Pricier than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K1
Total capacity48 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does the 5600 MT/s speed rating mean for actual performance in a Supermicro H13SVW-N server?

The DDR5 5600 module operates at its rated 5600 MT/s with CL46 latency when installed in a compatible Supermicro H13SVW-N motherboard, delivering the standard data rate for this platform.

How does the 288-pin RDIMM interface affect installation and compatibility?

This 288-pin Registered DDR5 RDIMM fits only DDR5 RDIMM slots; the registered buffer allows full-capacity operation across all populated slots on the H13SVW-N, and the module will not fit UDIMM or SODIMM sockets.

What physical space and power does the 48 GB 2Rx8 module need to fit in the H13SVW-N?

The module uses the standard 288-pin DDR5 RDIMM form factor with no heat spreader, runs at 1.1 V, and occupies a single DIMM slot following the motherboard's population rules.

More in Model-Specific Memory Upgrades

Similar items