We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 192GB (6x32GB) CL46 1.1V 2Rx8 Supermicro H13SVW-N memory upgrade

SKU CH-3QCY-V8ZWH

A 192 GB DDR5 ECC registered memory kit of six 32 GB modules running at 5600 MHz with CL46 latency and 1.1 V for the Supermicro H13SVW-N motherboard

  • Total capacity192 GB (6 × 32 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 6X32GB

Show 12 more

Speed 5600MHz

  • 192 GB total capacity from six 32 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on Supermicro H13SVW-N
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operation matches the board's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the exact slot type the motherboard expects

Exact-match DDR5-5600 ECC RDIMM kit

This 192GB kit (6 x 32GB) delivers DDR5-5600 (PC5-44800) Registered ECC memory at 1.1V with CL46 timing. It is built for the Supermicro H13SVW-N motherboard where the controller expects this exact rank, voltage and timing for full-capacity recognition at rated speed.

Registered 288-pin form factor

Each module uses the 288-pin RDIMM form factor that the H13SVW-N requires, not UDIMM or SODIMM. Registered architecture offloads the memory controller so every slot runs fully populated at full capacity, while ECC corrects single-bit errors on the fly to stop silent data corruption and unplanned reboots. No heat spreaders are fitted.

Replaces smaller or slower DDR5 configurations

The kit upgrades systems running lower-capacity or slower DDR5 modules that limit total memory or bandwidth. The jump is worth it when your workload needs the full 192GB at DDR5-5600 with Registered ECC stability and the motherboard manual confirms this population order. Not for boards that only accept UDIMM or non-ECC memory.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,278.99
Pricier than about 82% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (6 × 32 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $32.70 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-328K6
Total capacity192 GB (6 × 32 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 6 × 32 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will DDR5 5600 PC5-44800 run at full speed on the Supermicro H13SVW-N?

The kit is spec-matched to the Supermicro H13SVW-N motherboard, so the memory controller will recognize the 5600 MT/s rating and operate at that speed when populated per the board's rules.

Does the 288-pin RDIMM form factor fit the H13SVW-N DIMM slots?

Yes, the motherboard requires 288-pin registered RDIMMs and this kit provides exactly that form factor; it is not a UDIMM or SODIMM.

What population order should I follow when installing all six 32 GB modules?

Consult the Supermicro H13SVW-N manual for the approved DIMM population sequence, then install each RDIMM firmly until the ejector clips lock on both sides.

More in Model-Specific Memory Upgrades

Similar items