We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 192GB (2x96GB) CL46 1.1V 2Rx4 Supermicro H13SVW-N memory upgrade

SKU CH-99S5-8JYPQ

192 GB DDR5 5600 ECC registered RDIMM kit (2 × 96 GB, CL46, 1.1 V, 2Rx4) validated for Supermicro H13SVW-N

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 192 GB total capacity from two 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects errors and supports full population
  • 1 V operation matches the server memory controller specification
  • Verified compatible with Supermicro H13SVW-N motherboard

192 GB DDR5-5600 ECC RDIMM kit

This 192 GB kit contains two 96 GB DDR5-5600 registered ECC modules built to the PC5-44800 standard. It is intended for administrators upgrading a Supermicro H13SVW-N motherboard that requires 288-pin RDIMMs with registered buffering and error-correcting code.

Registered DDR5 limits and population rules

Registered DDR5 offloads the memory controller so every slot can run fully populated at the rated 5600 MT/s speed, but the motherboard manual defines the maximum capacity per channel and the required DIMM population order. ECC corrects single-bit errors on the fly, yet it cannot protect against multi-bit failures or replace a proper backup strategy. The 1.1 V operating voltage is fixed by the DDR5 specification for this module class.

Upgrade from smaller or unbuffered DDR5 kits

This kit replaces lower-capacity RDIMM sets or unbuffered UDIMMs that the H13SVW-N cannot recognise at full population. The jump is worth it when the workload demands the full 192 GB at native DDR5-5600 throughput with registered stability and ECC integrity. Systems limited to fewer slots, lower speeds or UDIMM-only designs will not benefit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,353.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $27.89 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 192 GB kit or a different capacity for my Supermicro H13SVW-N?

This 192 GB kit provides two 96 GB modules that match the board's DDR5-5600 Registered ECC requirements; verify your motherboard manual for maximum supported capacity and approved population order before ordering.

What does DDR5-5600 CL46 mean for real-world server performance?

The modules run at 5600 MT/s with a CAS latency of 46 cycles, delivering the rated bandwidth and timing the memory controller expects for stable operation in the Supermicro H13SVW-N.

Is the 288-pin RDIMM interface compatible with standard DDR5 UDIMM slots?

No, the 288-pin Registered DIMM form factor is keyed differently and requires RDIMM slots; it will not fit or function in UDIMM or SODIMM sockets.

More in Model-Specific Memory Upgrades

Similar items