We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules, no heat spreaders, 288-pin gold contacts, 96GB kit

NEMIX RAM

NEMIX RAM 96GB 2x48GB DDR5 5600 ECC RDIMM Supermicro H13SVW-N

SKU CH-NDGR-XTF6C

96GB dual-channel DDR5-5600 ECC RDIMM kit with CL46 timing and 1.1V operation, validated for Supermicro H13SVW-N servers

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB 2X48GB

Show 12 more

Speed 5600MHz

  • 96 GB capacity lets you run large workloads without swapping
  • DDR5 5600 speed transfers data at PC5-44800 bandwidth
  • ECC and registered design corrects errors and stabilises full-slot population
  • 2Rx8 organisation matches the Supermicro H13SVW-N memory controller expectations
  • 1 V operation keeps power draw low for dense server configurations

Exact-match upgrade for Supermicro H13SVW-N

This 96GB kit contains two 48GB DDR5 5600 RDIMMs built to the exact rank, voltage, and timing the motherboard expects. Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated speed while ECC corrects single-bit errors on the fly. Major OEM Samsung, Micron, or Hynix components deliver enterprise stability for production workloads.

Check population rules and manual before ordering

Verify supported capacities, approved DIMM population order, and installation steps in your system or motherboard manual. The 288-pin Registered form factor this board requires is not a UDIMM or SODIMM. Ensure your configuration matches the 2Rx8, 1.1V, CL46 specification so the kit is recognised at full capacity and runs at DDR5-5600 without downclocking.

Replaces lower-capacity or non-ECC DDR5 RDIMMs

The jump is worth it when your workload demands full-slot population at maximum supported density with error correction. Builders who need a different form factor, unbuffered modules, or a memory generation other than DDR5 cannot use this kit. Consult your manual to confirm the upgrade path matches your server's qualified memory list.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,150.99
Pricier than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $22.41 per GB
Pricier than about 67% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 96GB kit ship as two 48GB modules or do I need to buy a second kit?

The kit includes two 48GB DDR5 5600 RDIMMs for a total of 96GB, so no additional modules are required.

Should I choose this 2Rx8 CL46 kit or look for a different rank or latency for the Supermicro H13SVW-N?

This 2Rx8 CL46 kit matches the exact rank, voltage, and timing the board's memory controller expects for full-capacity recognition at rated speed.

Will the DDR5 5600 (PC5-44800) rating actually run at 5600 MT/s once installed in the H13SVW-N?

Yes, the modules are spec-matched to the motherboard's population rules, so the system will recognise them at full capacity and operate at the rated 5600 MT/s.

More in Model-Specific Memory Upgrades

Similar items