We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 512GB 8x64GB DDR5 5600 CL46 2Rx4 ECC RDIMM memory upgrade for Supermicro H14DSG-OM

SKU CH-1KNR-6E67C

Eight 64 GB DDR5 RDIMMs deliver 512 GB of registered ECC memory at 5600 MT/s with CL46 timing for the Supermicro H14DSG-OM

  • Total capacity512 GB (8 × 64 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 512GB 8X64GB

Show 30 more
  • 512 GB total capacity in an 8-module kit for maximum server density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput workloads
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors on the fly
  • 10 V operation and CL46 latency match the motherboard memory controller exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DSG-OM motherboard

512GB DDR5-5600 ECC RDIMM kit for Supermicro

This 512GB kit contains eight 64GB DDR5-5600 registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-OM memory controller expects. It is intended for administrators who need to populate every slot at full capacity without compatibility guesswork.

288-pin registered form factor with major OEM chips

Each module uses a 288-pin RDIMM design with 2Rx4 organisation and 1.10V operation, sourced from Samsung, Micron or Hynix die. The registered architecture buffers the command bus so all eight slots run stably at rated speed, while on-die ECC corrects single-bit errors before they affect workloads.

Replaces partial or mismatched DDR5 populations

If the server currently runs fewer modules, slower speeds or unbuffered DIMMs that the board cannot recognise at full capacity, this kit restores the validated configuration. The jump is worthwhile when the platform manual confirms eight-DIMM support at DDR5-5600 and the application demands maximum registered ECC capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $15,508.99
Pricier than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 512 GB (8 × 64 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $30.29 per GB
Pricier than about 86% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-924K8
Total capacity512 GB (8 × 64 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items512 GB 8 × 64 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the DDR5-5600 PC5-44800 interface cap the transfer rate at 5600 MT/s on the Supermicro H14DSG-OM?

Yes, the kit is rated DDR5-5600 (PC5-44800) so the memory controller will run it at 5600 MT/s when populated per the board rules.

What physical slot and form factor do the 8 x 64 GB modules need on the H14DSG-OM?

The motherboard requires 288-pin DDR5 RDIMM slots; each module is a registered 2Rx4 DIMM that fits those slots.

How are the eight RDIMMs installed and which population step is often missed?

Follow the manual's DIMM population order for eight 2Rx4 modules; the common mistake is skipping the prescribed sequence and not seating every module fully.

More in Model-Specific Memory Upgrades

Similar items