We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 768GB (8 x 96GB) DDR5-5600 ECC Registered RDIMM CL46 1.1V 2Rx4 Supermicro H13DSH memory upgrade

SKU CH-Y8Q2-5QT5F

8-module 768GB DDR5-5600 ECC RDIMM kit at 1.1V CL46 validated for Supermicro H13DSH servers

  • Total capacity768 GB (8 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 768GB 8X96GB

Show 30 more
  • 768 GB total capacity from eight 96 GB modules for maximum server memory density
  • DDR5-5600 speed with CL46 latency and 1.1 V operation matches the platform's rated timing
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors for enterprise stability
  • 288-pin 2Rx4 form factor verified for Supermicro H13DSH motherboard population rules
  • Lifetime replacement warranty with US-based technical support included

Supermicro H13DSH DDR5 upgrade

This 768GB kit contains eight 96GB DDR5-5600 ECC registered RDIMMs built for the Supermicro H13DSH motherboard. Each module runs at 1.1V with CL46 latency and a 2Rx4 organization so the memory controller recognizes the full capacity at rated speed.

Sustained enterprise stability

Registered architecture buffers the address and command signals, letting all eight slots stay fully populated under continuous load without signal degradation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption that would otherwise trigger unplanned reboots during production workloads.

288-pin DDR5 RDIMM form factor

The kit uses the exact 288-pin registered DIMM layout the H13DSH requires; UDIMM or SODIMM modules will not fit or function. Verify your board's population rules and maximum supported capacity per slot before ordering to ensure compatibility.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $21,300.99
Pricier than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 768 GB (8 × 96 GB)
Higher than about 92% of the 20,941 comparable items (median 32 GB).
Price per GB $27.74 per GB
Pricier than about 78% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K8
Total capacity768 GB (8 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items768 GB 8 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does this 768GB DDR5-5600 kit draw at 1.1V when all eight 96GB modules run continuously?

Each module operates at 1.1V with a CL46 latency; total power depends on your server's memory-controller load and airflow, but the rated voltage stays at 1.1V across all eight 2Rx4 RDIMMs.

What motherboard slot type and population rules must my Supermicro H13DSH already have to accept this 8 x 96GB RDIMM kit?

The board needs eight 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules at 5600 MT/s; consult the H13DSH manual for the exact population order before installing all eight sticks.

Will these 5600 MT/s CL46 registered ECC modules down-clock reliably if I keep older DDR5-4800 RDIMMs in the same H13DSH chassis?

The kit is validated for 5600 MT/s on the H13DSH; mixing speeds forces the memory controller to run all slots at the lowest common speed, so older 4800 MT/s RDIMMs would pull the whole array down to 4800 MT/s.

More in Model-Specific Memory Upgrades

Similar items