We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-EP2V-7GN21

96 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMM built for the Supermicro H14DSG-OM motherboard

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 30 more
  • 96 GB DDR5 5600 registered ECC module delivers full-capacity performance at rated speed
  • 2Rx4 registered architecture with ECC corrects single-bit errors on the fly for enterprise stability
  • 1 V CL46 timing matches the memory controller spec so the system recognises the module immediately
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM motherboard slot exactly
  • Lifetime replacement warranty and free US-based technical support back the upgrade long term

Compatible Server Memory Upgrade

This 96GB DDR5 module is built as an exact-match upgrade for the Supermicro H14DSG-OM motherboard. It uses the 288-pin RDIMM form factor that the board requires and is verified for the platform's population rules. The registered ECC design supports full-capacity operation across every slot. System administrators can install it with confidence that the memory controller will recognise the full capacity at rated speed.

Registered ECC with 2Rx4 Organisation

The module runs at DDR5-5600 (PC5-44800) with CL46 latency at 1.1V. Its 2Rx4 rank structure and registered architecture offload the memory controller to maintain stability when all slots are populated. ECC functionality catches and corrects single-bit errors on the fly to prevent silent data corruption. Major OEM chips from Samsung, Micron or Hynix provide enterprise-grade reliability without a heat spreader.

Suited for H14DSG-OM Population

This kit suits administrators upgrading a Supermicro H14DSG-OM system that specifically calls for 288-pin registered DDR5 DIMMs with 2Rx4 organisation. Builders needing UDIMM or SODIMM form factors cannot use this module. Buyers whose motherboards require different rank configurations, voltage levels or DDR generations should consult their manual before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $3,016.99
Pricier than about 73% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $31.43 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 5600 MHz rating actually run at that speed in my Supermicro H14DSG-OM?

Yes — the module is spec-matched to the board's memory controller, so it initialises at DDR5-5600 with CL46 timings and 1.1 V without manual tuning.

What does the 288-pin RDIMM interface mean for installation?

It fits only 288-pin DDR5 RDIMM slots; the registered buffer and ECC require a server-class motherboard like the H14DSG-OM and will not work in UDIMM or SODIMM sockets.

How much clearance does the module need above the DIMM slot?

The kit has no heat spreader, so it uses the standard low-profile RDIMM height and fits in typical 1U server chassis without extra vertical clearance.

More in Model-Specific Memory Upgrades

Similar items