We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 RDIMM module 288-pin no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM Supermicro H13DSH memory upgrade

SKU CH-0A33-FPY7D

96GB DDR5 5600MHz CL46 2Rx4 1.1V ECC registered RDIMM validated for Supermicro H13DSH motherboards

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 30 more
  • 96 GB capacity lets you run large datasets in memory
  • DDR5 5600 speed transfers data at the rated frequency
  • CL46 CAS latency matches the controller timing for stable operation
  • Registered ECC architecture corrects single-bit errors while buffering the bus
  • 1 V operation keeps power draw low for dense server deployments

Exact-match DDR5 RDIMM for Supermicro H13DSH

This 96GB DDR5 5600MHz CL46 module is built as a registered ECC RDIMM with a 2Rx4 organisation and 1.1V operation. It targets administrators who need a single, validated upgrade that the H13DSH memory controller recognises at full capacity and rated speed without manual tuning.

Verify motherboard population rules before ordering

The H13DSH imposes specific DIMM-slot sequence and maximum-capacity-per-channel limits that differ by BIOS revision. Consult the Supermicro manual for the approved installation order, supported ranks per channel, and any firmware update required so the 96GB kit posts correctly at 5600 MT/s.

Registered architecture

The 288-pin RDIMM format uses a register to buffer address and command signals, letting every populated slot run at the specified 5600 speed even when all channels are full. On-die ECC corrects single-bit errors in flight, preventing silent data corruption that would otherwise force unplanned reboots in production workloads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,776.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $28.93 per GB
Pricier than about 82% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the 96GB kit include the 288-pin RDIMM modules only, or are any cables or brackets supplied?

The package contains the 96GB DDR5 5600MHz CL46 2Rx4 1.1V ECC Registered RDIMM kit. No cables, brackets or additional hardware are included.

Should I choose the CL46 2Rx4 1.1V variant or a different speed and latency for the Supermicro H13DSH?

Select the DDR5 5600 CL46 2Rx4 1.1V registered ECC module; it matches the motherboard's required rank, voltage and timing for full-capacity operation.

Will the rated 5600MHz speed be active immediately after installing the 96GB modules in the H13DSH?

The modules run at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V once the system is configured for the supported population order.

More in Model-Specific Memory Upgrades

Similar items