We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM sticks without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 4800 192GB 2x96GB ECC RDIMM Supermicro H13SSH

SKU CH-94TE-RWPFW

192 GB DDR5-4800 registered ECC kit in two 96 GB modules, validated for the Supermicro H13SSH motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 30 more
  • 192 GB capacity in a 2×96 GB kit doubles server memory headroom
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for H13SSH workloads
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors on the fly
  • 10 V operation at 2Rx4 rank matches the motherboard's exact voltage and population rules
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with Supermicro H13SSH slots

192GB DDR5 4800 ECC RDIMM Kit

This 192GB kit contains two 96GB DDR5 4800 Registered ECC RDIMMs built for the Supermicro H13SSH motherboard. Each module runs at 1.1V with CL40 latency and a 2Rx4 organisation. The 288-pin form factor matches the board's DIMM slots exactly.

Check Motherboard Population Rules

Verify the H13SSH manual for supported capacities per slot and the required population order before ordering. The board demands Registered RDIMMs — not UDIMMs or SODIMMs — and may limit total capacity or rank count depending on the CPU installed. Confirm your firmware version matches the vendor's qualified vendor list.

For Supermicro H13SSH Servers Needing Maximum

This kit suits administrators populating every slot on an H13SSH with Registered ECC memory at the board's native speed. Buyers using consumer motherboards, workstations requiring UDIMMs, or systems that cannot address 96GB per DIMM should look at something else.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,461.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $28.45 per GB
Pricier than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 4800 MHz PC5-38400 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What comes in the box and is anything else required to install this memory?

The box contains the 192GB kit as two 96GB DDR5 4800 ECC registered RDIMMs. No extra parts or cables are needed; the modules slot directly into the Supermicro H13SSH motherboard.

Should I choose this 2 x 96GB kit or a different capacity for the H13SSH?

This kit provides 192GB total using two 96GB 2Rx4 modules at 1.1V CL40, matching the board's DDR5 RDIMM requirements. Pick it when your workload needs that full capacity and your manual confirms two-DIMM population.

What does the DDR5 4800 CL40 rating mean once the modules are running in the server?

The memory operates at 4800 MT/s with CAS latency 40 at 1.1V, delivering the exact speed and timing the H13SSH memory controller expects for stable, error-corrected operation across both slots.

More in Model-Specific Memory Upgrades

Similar items