We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 1.1V 2Rx4 ECC Registered RDIMM Supermicro H14DST-F memory upgrade

SKU CH-WMJX-HYJJX

192 GB DDR5-5600 registered ECC kit (2 × 96 GB, CL46, 1.1 V, 2Rx4) validated for Supermicro H14DST-F servers

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 30 more
  • 192 GB total capacity in a 2 x 96 GB kit for full Supermicro H14DST-F population
  • DDR5 5600 speed with CL46 latency runs at rated performance on the motherboard
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches the board's memory-controller expectations
  • 288-pin DDR5 form factor fits the exact slots required by the Supermicro H14DST-F

Exact-match DDR5 RDIMM kit

This 192GB kit contains two 96GB DDR5 5600 registered ECC modules built to the Supermicro H14DST-F memory controller specification. Each DIMM is a 2Rx4 part running at 1.1V with CL46 timing so the server recognises the full capacity at rated speed. The registered design is required by this motherboard and will not work in UDIMM or SODIMM slots.

Sustained enterprise workloads

Registered architecture offloads the memory controller allowing every slot to stay fully populated at full capacity during continuous operation. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots before they reach production systems. The 2Rx4 organisation and standard voltage maintain stability across long compute runs without throttling.

Thermals and power in normal use

Modules operate at the standard 1.1V DDR5 voltage with no heat spreaders fitted relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller contributing to lower overall system power draw. The design targets quiet rack environments where sustained airflow handles thermal dissipation without additional cooling hardware.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $5,428.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $28.28 per GB
Pricier than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does the 1.1V DDR5 RDIMM kit draw when the server runs continuously?

Each 96GB module operates at 1.1V; total system power depends on the Supermicro H14DST-F memory controller and how many slots are populated.

What must the motherboard provide for these 288-pin registered ECC modules to function?

The Supermicro H14DST-F must support DDR5 RDIMM, registered ECC, 2Rx4 organisation and 5600 MT/s operation per its qualified-vendor list.

Will the CL46 5600 MT/s timing work with slower DDR5 DIMMs already installed in other slots?

The board will run all populated slots at the lowest common speed and highest latency; mixing slower modules forces this kit to down-clock.

More in Model-Specific Memory Upgrades

Similar items