We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 192GB 4x48GB CL46 1.1V ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-30QD-RXMA4

192 GB DDR5 ECC RDIMM kit runs at 5600 MHz with CL46 latency and 1.1 V for the Supermicro H14DSG-OM motherboard

  • Total capacity192 GB (4 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 192 GB total capacity from four 48 GB modules
  • DDR5-5600 speed with CL46 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors automatically
  • 1 V operation matches the board's memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM motherboard

Exact DDR5-5600 kit for Supermicro H14DSG-OM

This 192GB kit contains four 48GB DDR5 5600 RDIMM modules built to the precise rank, voltage and timing the H14DSG-OM memory controller expects. It is intended for administrators upgrading that specific motherboard to its maximum supported capacity with registered ECC memory.

Registered ECC RDIMM with 2Rx8 organisation

Each module is a 288-pin DDR5 RDIMM operating at 1.1V with CL46 latency and a 2Rx8 layout. The registered buffer and on-die ECC let the board run all slots fully populated at the rated 5600 MT/s while correcting single-bit errors before they affect workloads.

Populates four DIMM slots on the target board

The kit fills four DDR5 RDIMM slots on the Supermicro H14DSG-OM, leaving no empty slots in a four-channel configuration. It is not suitable for systems that require UDIMM or SODIMM form factors, or for boards that do not support registered ECC DDR5 at this density.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $4,346.99
Pricier than about 78% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (4 × 48 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $22.64 per GB
Pricier than about 68% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K4
Total capacity192 GB (4 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 4 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the DDR5-5600 rating run at that speed once installed in a Supermicro H14DSG-OM?

Yes, the kit is spec-matched to the board's memory controller so it is recognized at full capacity and operates at its rated 5600 MT/s with CL46 timing.

What does the registered ECC design do for a fully populated server?

Registered buffering offloads the memory controller allowing all four slots to run at 48 GB each, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

What physical slot and pin count does this kit require?

It uses the 288-pin DDR5 RDIMM form factor required by the H14DSG-OM; it will not fit UDIMM or SODIMM sockets.

More in Model-Specific Memory Upgrades

Similar items