We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 256GB (2×128GB) CL46 2Rx4 1.1V 288-pin Supermicro H14DSH memory upgrade

SKU CH-XDTF-58WF5

A 256 GB DDR5 ECC RDIMM kit with two 128 GB modules running at 5600 MHz, CL46, 1.1 V, 2Rx4 registered design validated for the Supermicro H14DSH motherboard

  • Total capacity256 GB (2 × 128 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 256 GB capacity from two 128 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency for high-throughput workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation at 2Rx4 rank for stable fully-populated slots
  • Exact-fit 288-pin RDIMM kit validated for Supermicro H14DSH motherboard

Exact-fit DDR5 kit for Supermicro H14DSH

This 256 GB kit contains two 128 GB DDR5-5600 RDIMMs built to the board's registered ECC specification. It targets administrators who need the full memory capacity the H14DSH can recognise at its rated 5600 MT/s speed.

Registered ECC headroom and population limits

Registered architecture lets every slot run fully populated at 256 GB while ECC corrects single-bit errors on the fly. The 2Rx4 organisation and CL46 timing meet the controller's expectations, but the kit cannot exceed the motherboard's maximum supported capacity or population rules.

DDR5-5600 interface ceiling

The PC5-44800 interface tops out at 5600 MT/s, so bandwidth is capped at that data rate. Systems requiring faster DDR5 speeds or unbuffered UDIMM modules cannot use this registered kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $8,697.99
Pricier than about 85% of the 21,161 comparable items (median $397.99).
Total capacity 256 GB (2 × 128 GB)
Higher than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $33.98 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-724K2
Total capacity256 GB (2 × 128 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items256 GB 2 × 128 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 2Rx4 1.1V DDR5-5600 RDIMMs run at rated speed alongside existing 1Rx8 DDR5-4800 modules in my Supermicro H14DSH?

The board will clock all installed DIMMs to the lowest common speed and apply the loosest timings across channels; mixing 5600 CL46 2Rx4 sticks with 4800 1Rx8 modules therefore forces the kit down to 4800 MHz.

How can I confirm the 256 GB kit is detected at DDR5-5600 CL46 with ECC active after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 5600 MT/s, CAS latency shows 46, total capacity reports 256 GB, and ECC status is reported as enabled or active.

Does the MR44800-724K2 kit include any heatsinks, cables or installation tools, or must those be sourced separately?

The package contains only the two 128 GB DDR5 5600 2Rx4 1.1 V CL46 288-pin ECC Registered RDIMM modules; no heat spreaders, cables or tools are included.

More in Model-Specific Memory Upgrades

Similar items