We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600MHz 192GB 12x16GB ECC RDIMM CL46 1.1V Supermicro H14DST-F memory upgrade

SKU CH-BN4Y-5WVC8

A 192GB DDR5 ECC RDIMM kit of twelve 16GB modules at 5600MHz CL46 1.1V, validated for the Supermicro H14DST-F motherboard

  • Total capacity192 GB (12 × 16 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 12X16GB

Show 30 more
  • 192 GB capacity across 12 matched 16 GB modules for maximum server density
  • DDR5 5600 MT/s speed rated at PC5 44800 for high-throughput workloads
  • Registered ECC RDIMM design with 1Rx8 organisation offloads the controller and corrects single-bit errors
  • 1 V operation at CL46 timing matches the Supermicro H14DST-F memory controller exactly
  • 288-pin RDIMM form factor verified for the H14DST-F motherboard population rules

192 GB DDR5 ECC RDIMM kit for Supermicro H14DST-F

This 192 GB kit contains twelve 16 GB DDR5 5600 MHz registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DST-F memory controller expects. It targets administrators who need full-capacity population across every slot without compatibility guesswork.

Registered architecture offloads the memory

Each 288-pin RDIMM runs at 1.1 V with CL46 latency, allowing all twelve slots to operate fully populated at the rated 5600 MT/s speed. The registered design reduces electrical load on the controller while on-die ECC corrects single-bit errors before they affect production workloads.

Twelve modules fill every DIMM slot on the board

The kit matches the motherboard’s required 288-pin RDIMM form factor and population rules, so no UDIMM or SODIMM alternatives will fit. Verify the system manual for approved capacity limits and installation order before adding this memory to your configuration.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,016.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (12 × 16 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $31.34 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-618K12
Total capacity192 GB (12 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items192 GB 12 × 16 GB DDR5 5600 MHz PC5-44800 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How do I install the 12 DDR5 RDIMM modules into the Supermicro H14DST-F, and which population step is most often missed?

Populate all 12 slots following the motherboard manual’s exact DIMM-population order; the step most often missed is verifying the required sequence for a fully populated 1Rx8 configuration before powering on.

What maintenance or replacement will this 192GB DDR5 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; ECC corrects single-bit errors automatically, and only a failed module would need replacement under the lifetime warranty.

What limit appears first when the 12x16GB DDR5-5600 CL46 kit runs sustained workloads on the H14DST-F?

The memory controller’s maximum supported capacity and population rules for 1Rx8 Registered DIMMs are the first limit; thermal throttling can occur if chassis airflow is insufficient for 12 modules at 1.1V.

More in Model-Specific Memory Upgrades

Similar items