SANOXY Cat6A Ethernet Cable 50FT Shielded STP 10Gbps 500MHz 26AWG Pure Copper Gold Plated RJ45 Non-Booted Blue
Shielded Cat6A patch cable delivers 10 Gbps at 500 MHz over 50 ft with 26 AWG pure copper and gold-plated RJ45 connectors
- 10Gbps speed for fast data transfer
- 500MHz bandwidth supports high-frequency signals
- Shielded STP design reduces electromagnetic interference
- Pure copper 26AWG conductors ensure reliable conductivity
- Gold-plated RJ45 contacts resist corrosion for stable connections
Close-range Cat6A patch cable
This 50 ft Cat6A patch cable is built for short runs between patch panels, switches and side-by-side equipment. Shielded STP construction and 26 AWG pure copper conductors support 10 Gbps at 500 MHz. Non-booted RJ45 plugs with 50-micron gold contacts fit dense racks and simplify cable management.
Shielded thermals and signal integrity
The foil-and-braid shield blocks electromagnetic interference and crosstalk in crowded cabinets. Pure copper cores keep resistance low, so power draw stays minimal and the link remains stable under sustained 10 Gbps loads. No active components means silent operation and no heat contribution to the rack.
Upgrade from unshielded Cat5e or Cat6
Replaces older unshielded patch cords when 10 Gbps throughput or 500 MHz bandwidth is required. The jump is worth it in high-density installs where alien crosstalk degrades shorter links. Not suited for buyers needing longer horizontal runs, outdoor rating or boot-protected latch tabs.
How it compares
Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.
- Price $34.99
- Pricier than about 79% of the 9,945 comparable items (median $14.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
SANOXY Cat6A Shielded STP Ethernet Cable 25FT 10Gbps 500MHz 26AWG Gold RJ45 Black
SANOXY Cat6A Shielded STP Patch Cable 30ft 10Gbps 500MHz 26AWG Gold 50µ Blue
SANOXY Cat6A network ethernet cable 30FT shielded STP 10Gbps 500MHz 26AWG gold plated RJ45 non-booted black
SANOXY Cat6A Shielded STP Ethernet Cable 50FT 10Gbps 500MHz 26AWG Gold Plated RJ45 Non-Booted Black
Questions about this item
How do I plug the non-booted RJ45 connector into a high-density patch panel without snagging adjacent ports?
Align the connector squarely with the port and push straight in; the non-booted design eliminates the latch cover that catches on neighbouring jacks in tight rows.
Will the 50-micron gold-plated contacts need cleaning or re-plating over time?
The 50-micron gold layer resists corrosion under normal indoor use; no cleaning or re-plating is required for the life of the cable.
At what point does the 26AWG stranded copper limit the 10Gbps signal on a 50-foot run?
The 26AWG conductors meet Cat6A specifications for 10Gbps at 500MHz across the full 50-foot length; no distance-related limit appears before the rated maximum.
More in Ethernet & LAN Cables
Similar items
Monoprice Inc. 140885 Flat Cat6 Network Ethernet Cable 10 ft Black 30AWG 550MHz
- Networking Patch Ca…
- 10 ft (3.05 m)
Cables To Go 27816 network ethernet cable Cat6 snagless UTP orange 50 ft
- RJ45
- RJ45
Nippon Labs 60CAT6A-6WT Cat6A network ethernet cable 6 ft white 24 AWG
- 6A
- RJ45
Nippon Labs 60CAT6A-25-28AM network ethernet cable 25 ft 28 AWG
- Cat6A
- RJ45 plug with 50-m…
Cables To Go 31360 Cat6 network ethernet cable 75 ft Gray
- RJ45
- RJ45
Nippon Labs 60CAT6A-75OR Cat6A UTP network ethernet cable 75 ft orange
- Cat6A
- RJ45










